Here is the output of pciconf -lv (Video Driver)
[EMAIL PROTECTED]:5:0: class=0x030000 card=0x006b103c chip=0x58351002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'Mobility Radeon 9100 IGP (RS300M AGP)' class = display subclass = VGA I tried bunch of things in my xorg.conf (like copying xorg.conf from ubuntu install which i posted earlier) and also I tried following monitor section config Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Thanks!!! Neeraj Date: Wed, 14 Feb 2007 21:48:26 -0800 From: Garrett Cooper <[EMAIL PROTECTED]> Subject: Re: Xorg on FreeBSD does not work To: firstname.lastname@example.org Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Neeraj Sharma wrote:
I am a newbie to FreeBSD world. I am trying to install FreeBSD6.2 on my HP zv5240us laptop. Everything else went off fine except the X config. I ran the command X -configure which created a xorg.conf.new file. When I use that to run X it just shows a blank screen and I am not able to go back to the console also. I tried playing around with the parameters in xorg.conf.new file but without success. If anyone can help me with this it will be great...
Two things that would really help: -The video card and monitor sections of your xorg.conf file. -More info about your video card (maker, model, etc). This can be found using pciconf -lv. A snippet would do nicely (not a whole list of all the devices in your PC that are PCI related. Thanks :). -Garrett _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"