Hi,

Great news: I can confirm that it works fine when the e1000phy patch was removed on this system. I have not tried this on the system that *did* work fine with the patch, though.

Thanks!

Regards,
Palle



--On onsdag, februari 14, 2007 09.25.22 +0900 Shigeaki Tagashira <[EMAIL PROTECTED]> wrote:

Hello,

Please try to use generic PHY driver (ukphy) instead of e1000phy; i.e.,
use nfe without the patch for e1000phy.

Regards,
---
Shigeaki Tagashira

Palle Girgensohn wrote:
Here's a problematic machine:

[EMAIL PROTECTED]:8:0:  class=0x068000 card=0xcb8410de chip=0x037310de rev=0xa2
hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
[EMAIL PROTECTED]:9:0:  class=0x068000 card=0xcb8410de chip=0x037310de rev=0xa2
hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge



Just the other day, on a machine running amd64, I got it working  with
no problems:

[EMAIL PROTECTED]:8:0:  class=0x068000 card=0x82391043 chip=0x037310de rev=0xa2
hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
[EMAIL PROTECTED]:9:0:  class=0x068000 card=0x82391043 chip=0x037310de rev=0xa2
hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge

Both run FreeBSD-6.2 release with the patches added. Same motherboards,
m2n sli-deluxe. So, might it have something to do with i386 vs. amd64?
For me, it works with amd64, and not with i386 (on at least two
machines). It is detected properly on  all machines, but the network
does not work.


Regards,
Palle


9 feb 2007 kl. 02.17 skrev Brian Smith:

Hi Palle,

   I am having the same issue.  I just installed FreeBSD 7.0 snapshot
from January to see if that helps because the latest patch requires
FreeBSD 6.2 and I had been running 6.1.  But still getting (none) for
the media type, but everything else *looks* like it is working.
However nothing responds.  Can you run pciconf -l -v and compare it to
my IDs?

[EMAIL PROTECTED]:16:0: class=0x068000 card=0xcb8410de chip=0x037310de
rev=0xa2 hdr=0x00
   vendor   = 'Nvidia Corp'
   device   = 'MCP55 Ethernet'
   class   = bridge
[EMAIL PROTECTED]:17:0: class=0x068000 card=0xcb8410de chip=0x037310de
rev=0xa2 hdr=0x00
   vendor   = 'Nvidia Corp'
   device   = 'MCP55 Ethernet'
   class   = bridge

Thanks,
   Brian Smith

Hello,

Sorry, there's no change, it still acts the same way.

media: Ethernet autoselect (none)
status: active

and the network does not work. No mediaopts work.

Regards,
Palle






_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to