Aaron Siegel wrote:
Hello

Cannot
read or play audio cdrom disks. run the Windows install for Win4BSD the install worked worked with a standard cdrom drive

Can
burn CD-R  (with cdrecord dev=1,0,0)
burn DVD-RW (with mkisofs)
play  Movie dvds.
read dvd disks
read data cdrom disks

I am using 6.1 Release.

/boot/loader.conf
atapicam_load="YES"
hw.ata.ata_dma="1"
hw.ata.atapi_dma="1"

I have set the mode for the device to UDMA33 from UDMA66.
How can I set this up so the drive boots as UDMA33? Do I add the following line into the device.hints:
hint.cd.0.mode="UDMA33"?

acd0: DVDR <DVD RW DRU-820A/1.0b> at ata1-master UDMA66
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers


I am receiving a following errors while booting
cd0: cd present [309837 x 2048 byte records]
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST csi:0,0,21,0 asc:64,0
(cd0:ata1:0:0:0): Illegal mode for this track
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back

The errors when playing a DVD
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 12 fb 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 13 4e 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 45 f0 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error
(cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 9e 34 0 0 0 c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI Status: Check Condition
(cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4
(cd0:ata1:0:0:0): Reserved ASC/ASCQ pair
(cd0:ata1:0:0:0): Unretryable error

Thank you
Aaron

The question is, how are you trying to read the audio information on the disk(s).
-Garrett
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to