My machine is working with the kernel that comes with 6.1-STABLE (I archived this good kernel before upgrade the OS to 6.2). No, I'm not using geom. Can you send your dmesg.boot and "sysctl -a kern" output? Marc G. Fournier wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Thiago ... > > I'm just curious here, but are you by any chance using geom at all? The > only > machine I have that seems to be affected like this (where netstat -m doesn't > seem to indicate a problem with mbufs) is using gmirror ... the rest all use hardware RAID controllers ... > > Its a long shot, but so far, its the only one I seem to be able to draw :( > > > - --On Sunday, April 01, 2007 17:07:08 -0300 Thiago Esteves de Oliveira <[EMAIL PROTECTED]> wrote: > > >> I've tried to increase the kern.ipc.nmbclusters value but it worked only >> when I changed the kernel to an older one. >> >> netstat -m (Now it's working with the same values.) >> - >> 515/850/1365 mbufs in use (current/cache/total) >> 512/390/902/65024 mbuf clusters in use (current/cache/total/max) 512/243 >> mbuf+clusters out of packet secondary zone in use (current/cache) 0/0/0/0 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/0 9k jumbo clusters in use (current/cache/total/max) >> 0/0/0/0 16k jumbo clusters in use (current/cache/total/max) >> 1152K/992K/2145K bytes allocated to network (current/cache/total) 0/0/0 >> requests for mbufs denied (mbufs/clusters/mbuf+clusters) >> 0/0/0 requests for jumbo clusters denied (4k/9k/16k) >> 0/0/0 sfbufs in use (current/peak/max) >> 0 requests for sfbufs denied >> 0 requests for sfbufs delayed >> 2759 requests for I/O initiated by sendfile >> 2982 calls to protocol drain routines >> >> Ethernet adapters >> - >> em0: <Intel(R) PRO/1000 Network Connection Version - 6.0.5> port >> 0xec80-0xecbf m em 0xfebe0000-0xfebfffff irq 10 at device 4.0 on pci7 em0: Ethernet address: 00:04:23:c3:06:78 >> em0: [FAST] >> skc0: <3Com 3C940 Gigabit Ethernet> port 0xe800-0xe8ff mem >> 0xfebd8000-0xfebdbfff irq 15 at device 6.0 on pci7 >> skc0: 3Com Gigabit NIC (3C2000) rev. (0x1) >> sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 >> sk0: Ethernet address: 00:0a:5e:65:ad:c3 >> miibus0: <MII bus> on sk0 >> e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 >> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, >> auto >> >> P.S.: I am using the FreeBSD/amd64. >> >> Brian A. Seklecki wrote: >> >>> Show us netstat -m on the broken kernel? Show us your dmesg(8) for em(4). >>> >>> TIA, >>> ~BAS >>> >>> On Fri, 2007-03-30 at 11:13 -0300, Thiago Esteves de Oliveira wrote: >>> >>>> Hello, >>>> >>>> I've had a problem with one of my FreeBSD servers, the machine has stopped >>>> its network services and then sent these messages: >>>> >>>> -Mar 27 13:00:03 anubis dhcpd: send_packet: No buffer space available -Mar >>>> 27 13:00:26 anubis routed: Send bcast sendto(em0, >>>> 18.104.22.168.520): No buffer space available >>>> >>>> The messages were repeated a lot of times before a temporary solution. >>>> I've changed the kernel(FreeBSD 6.2) to an older one(FreeBSD 6.1) and since then it's been working well. What happened? >>>> >>>> P.S.: I can give more informations if necessary. >>>> >>>> -- Thiago Esteves de Oliveira _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"