Sorry if this is obvious but I just did this myself
with similar problems. Is your /boot a seperate
partition? If so, bsd will not boot. It will happily
install but will come back with a no kernel found
error or similar. I believe this is because only the
/ partition is mounted at that point.
Hope this helps.
--- [EMAIL PROTECTED] wrote:
> I have installed FreeBSD 6.2 on an HP Proliant G5
> server with an E200i
> Smart Controller installed. The installation was
> When I reboot the server after the installation, the
> boot loader screen is
> displayed. I press F1 and the system beeps and
> comes back to the boot
> loader prompt.
> What should I be looking at? I am at a loss since I
> usually end up with
> leftover hardware and this time I acutally got to
> purchase new hardware
> just for this project.
> Any suggestions would be greatly appreciated.
> Thanks for your help.
> firstname.lastname@example.org mailing list
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
email@example.com mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"