@youshi10:
yeah, I'm aware that MacOSX supports for unix, but at the time that we
transfered the data to the hdd we didn't know which server was gonna
be running the hdd... Fat32 was the only FS that we know would be
compatible with any OS (but we didn't know of the size limit) so if
the server had been a Windows 2003 server, I don't think I would have
had any chance of opening that FS (unless 3rd party software if there
is any)


Anyways, here is the info that Reid asked for.

1: I updated the ports tree following the instructions of freebsd wiki

2:  I recompiled the kernel following the instructions of freebsd wiki:
cp /usr/src/sys/i386/conf/BASTION /usr/src/sys/i386/conf/BASTION2
vim /usr/src/sys/i386/conf/BASTION2
added option MSDOSFS_LARGE

cd /usr/src
make buildkernel KERNCONF=BASTION2

make installkernel KERNCONF=BASTION2
reboot

3: uname -a:
FreeBSD bastion 6.2-STABLE FreeBSD 6.2-STABLE #2L Mon May 21 00:30:39
PDT 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/BASTION2  i386

4: iffconfig -a:
bastion# ifconfig -a

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        atalk 65280.205 range 0-65534 phase 2 broadcast 0.255
        ether 00:e0:18:8d:10:8f
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fwe0: flags=108802<BROADCAST,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
        options=8<VLAN_MTU>
        ether 0a:00:46:29:6f:02
        ch 1 dma -1
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
        atalk 0.0 range 0-0 phase 2

Also, I think my network card that shows up took the place of the
otherone, in other words, rl1 is now rl0 and rl1 is gone... I don't
know if that just changed cos it can't find the other network card.


On 5/21/07, Reid Linnemann < [EMAIL PROTECTED]> wrote:
Written by Yanko Sanchez on 05/21/07 14:03>>
> Thanks for anyone that  has helped so far, I'm a freebsd newbie coming
> from linux.
>
> > So I basically re-compiled my kernel with the LARGE option on and it
> seems to mount the drive fine. I encountered another problem tho.
>
> Before I recompiled the kernel I updated the ports tree, basically cos
> I just wanted to see how it was done and it seemed to be successful.
> The problem is that after I recompiled the kernel a bunch of stuff
> stoped working.  I have the server setup as a router and my to Network
> cards isn't showing up anymore (both being the same type of cards, I
> use to have rl0 and rl1) so It isn't routing anymore, and now im
> getting a bunch of DHCPREQUEST messages on startup which I wasn't
> getting before. And other errors saying that my network card isn't
> configured. I checked /etc/rc.conf and the lines for ifconfig are
> still in there...
>
> Did I upgrade the kernel sources by doing an upgrade to the ports?
> That would make sense, but what bugs me is that I copied the same
> kernel config and just added the MSDOSFS_LARGE option once I booted up
> I got the errors mentioned above. Shouldn't it have stayed pretty much
> the same? I'm just trying to get a better understand if what happened
> to that I don't make the same mistake.
>
>
>

1. How did you upgrade your ports tree?
2. How did you recompile the kernel?
3. What does uname -a report?
4. what is the output of ifconfig -a?

_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to