Tim Daneliuk wrote:
I asked this question a while back, but needed to do more digging to make
sure I had latest sources etc.
I have an Intel motherboard that shows this for a SATA controller:
atapci1: <Intel ICH7 SATA300 controller> port
mem 0x90204000-0x902043ff irq 19 at device 31.2 on pci0
But the hard drive - a SATA 300 device - shows up like this:
ad4: 238475MB <WDC WD2500JS-00NCB1 10.02E02> at ata2-master SATA150
Using dd, I have confirmed that the drive is running nowhere near
SATA-III speeds, at least on reads:
968470075 bytes transferred in 7.132891 secs (135775249 bytes/sec)
This is on a 6.2-Stable system that is very lightly loaded...
SATA Cable not 300Mbps capable?
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"