I'm a newbie regarding FreeBSD OS,
but i have some knowledges about Unix generally.
My NIC (as i saw on some mail-lists, a "known"
problem) cannot map ports to memory..
it seems that i have to set PNPBIOS option
NO but this appear only in LINT uncommnented,
while in GENERIC is missing.. 
..another chance guess right "iomem"!
I tried to boot after LINT w some changes, 
but i doubt that i will succed soon...
BIOS is a JK version, a weird one, contains 
nothing about NIC & PnPOS there?!? 
So what should i have to do to solve my problem?
I attached here dmesg. Please note that configuring
of XFree also fails, i can't save after.. i have
not enough information about dispaly(hp 56),
-video card driver seems to be i810e-intel.

Thank you,
Best regards,
Dan Dima

Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Tue Jan 28 16:00:46 EET 2003
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
real memory  = 65994752 (64448K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 59072512 (57688K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc050f09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 11
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <Accton MPX 5030/5038 10/100BaseTX> irq 11 at device 14.0 on pci1
rl0: couldn't map ports/memory
device_probe_and_attach: rl0 attach returned 6
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1820-0x183f irq 9 at device 31.2 on 
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0x1840-0x187f,0x2000-0x20ff 
irq 10 at device 31.5 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19458MB <ST320410A> [39535/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s3a

Reply via email to