On Thu, Aug 09, 2007 at 10:08:02AM +0200, Konrad Heuer wrote:
> On Thu, 9 Aug 2007, Ingeborg Hellemo wrote:
> >(This SAN-stuff is one of my weak subjects, so please excuse me if I use
> >wrong terms. If there is a better list to ask this question, please tell
> >HW: ProLiant DL380 G4
> >OS: FreeBSD 6.2-RELEASE-p7
> >isp0: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x5000-0x50ff mem
> >0xfdff0000-0xfdff0fff irq 97 at device 1.0 on pci10
> >Id Refs Address Size Name
> >1 9 0xc0400000 7261f4 kernel
> >2 1 0xc0b27000 93040 ispfw.ko
> >3 1 0xc0bbb000 59f20 acpi.ko
> >4 1 0xc6dea000 16000 linux.ko
> >I am trying to access a disk-device on a SATABeast, but no success:
> >~/#camcontrol rescan all
> >Re-scan of bus 0 was successful
> >Re-scan of bus 1 was successful
> >Re-scan of bus 2 was successful
> >Re-scan of bus 3 was successful
> >~/#camcontrol devlist -v
> >scbus0 on ciss0 bus 0:
> ><COMPAQ RAID 1 VOLUME OK> at scbus0 target 0 lun 0 (pass0,da0)
> >scbus1 on ciss0 bus 32:
> >scbus2 on ciss0 bus 33:
> >scbus3 on isp0 bus 0:
> >< > at scbus3 target -1 lun -1 ()
> >scbus-1 on xpt0 bus 0:
> >< > at scbus-1 target -1 lun -1 (xpt0)
> >If we try to connect the fibre to our HP EVA SAN the disk shows up after a
> >'rescan all' which makes me believe that I have not done any major
> >in configuring the card.
> >I can see the device and LUN-number if I enter the cards BIOS, but not from
> >FreeBSD. We have tried changing disk-size and LUN-number on the Beast.
> >Any ideas?
> In such a case I'd try to boot the system using Knoppix or any other Linux
> system. Maybe this will give you some additional diagnostics which helps
> to make progress with FreeBSD. On the other hand, if Linux doesn't see the
> disk too, you'd have to look closer to your hardware.
Does your SATAbeast have a LUN exported to your host?
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204
You can find my resume at: http://www.Alameda.net/~ulf/resume.html
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"