detects fine

umass0: detached
umass0: TEAC TEAC FD-05PUB, rev 2.00/0.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <TEAC FD-05PUB 3000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C)

i downloaded ufdformat from

the tool compiles without errors on FreeBSD 6.2/i386

bit it doesn't work
it stalls at first cylinder and i'm getting in dmesg:

umass0: CBI reset failed, IOERROR
umass0: CBI bulk-in stall clear failed, STALLED
umass0: CBI bulk-out stall clear failed, STALLED

CTRL-C and kill doesn't work.

unplugging works.

from formatted diskettes i can read data (like dd if=/dev/da0 of=/dev/null bs=18k) but i can't write.

any attempt to write says "device busy".

my drive is listed in scsi_da.c quirks like this

                 * TEAC USB floppy mechanisms
                {T_DIRECT, SIP_MEDIA_REMOVABLE, "TEAC" , "FD-05*", "*"},
                /*quirks*/ DA_Q_NO_SYNC_CACHE

more quirks? any clue?

thank you
_______________________________________________ mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to