After connecting via VPN I can get decent throughput from the MPD host but very poor 
speed from anything past it. 
I have tried adjusting the iface mtu to as low as 1350 with the same results. 
Problems are on downloading files from the hosts to the client. 
I have: 
MPD version 3.10 
4.5-RELEASE as a Gateway/NATD/Firewall using IPFW. IPFW is set to OPEN. 
A separte public IP is redirected to a 4.7 RELEASE box on the inside. 
Client(s) tested with have been Windows 2000 SP2 and SP3 from 2 different ADSL Lines. 

client-----1.2.3.4 MPD/NATD 172.16.105.80------172.16.105.66 / 5.6.7.8 Redirected from 
1.2.3.4 

Tests using Penguinet SCP and a 1.9 MB ZIP file. 
Baseline Download the file from the public IP's 
1.2.3.4 -> client 180 kBs 
5.6.7.8 -> client 180 kBs 

Now test via the PPtP. 
172.16.105.80 -> client 84 kBs 
172.16.105.66 -> client 35 kBs 

I have another FreeBSD box on the inside and get the same results when SCPing via the 
tunnel. 

The configs and a log. 

mpd.conf 
default: 
        load pptp 

pptp: 
        new -i ng0 pptp pptp 
        set iface disable on-demand 
        set iface enable proxy-arp 
        set iface idle 1800 
        set iface mtu 1350 
        set bundle enable multilink 
        set link yes acfcomp protocomp 
        set link no pap chap 
        set link enable chap 
        set link keep-alive 10 60 
#       set link mtu 1460 
        set ipcp yes vjcomp 
        set ipcp ranges 172.16.105.80/32 172.16.105.75/32 
        set ipcp dns 172.16.105.67 

        set bundle enable compression 
        set ccp yes mppc 
        set ccp yes mpp-e40 
        set ccp yes mpp-e128 
        set ccp yes mpp-stateless 
        set bundle enable crypt-reqd 
# 
mpd.links 

# 

pptp: 
        set link type pptp 
        set pptp self 1.2.3.4 
        set pptp enable incoming 
        set pptp disable originate 



# 

And a log of a session. 

Multi-link PPP for FreeBSD, by Archie L. Cobbs. 
Based on iij-ppp, by Toshiharu OHNO. 
mpd: pid 169, version 3.10 ([EMAIL PROTECTED]:36 29-Jan-2003) 
[pptp] ppp node is "mpd169-pptp" 
mpd: local IP address for PPTP is 1.2.3.4 
[pptp] using interface ng0 
[pptp:pptp] mpd: PPTP connection from a.b.c.d:17670 
pptp0: attached to connection with a.b.c.d:17670 
[pptp] IFACE: Open event 
[pptp] IPCP: Open event 
[pptp] IPCP: state change Initial --> Starting 
[pptp] IPCP: LayerStart 
[pptp] IPCP: Open event 
[pptp] bundle: OPEN event in state CLOSED 
[pptp] opening link "pptp"... 
[pptp] link: OPEN event 
[pptp] LCP: Open event 
[pptp] LCP: state change Initial --> Starting 
[pptp] LCP: LayerStart 
[pptp] device: OPEN event in state DOWN 
[pptp] attaching to peer's outgoing call 
[pptp] device is now in state OPENING 
[pptp] device: UP event in state OPENING 
[pptp] device is now in state UP 
[pptp] link: UP event 
[pptp] link: origination is remote 
[pptp] LCP: Up event 
[pptp] LCP: state change Starting --> Req-Sent 
[pptp] LCP: phase shift DEAD --> ESTABLISH 
[pptp] LCP: SendConfigReq #1 
 ACFCOMP 
 PROTOCOMP 
 MRU 1500 
 MAGICNUM 23d72d4b 
 AUTHPROTO CHAP MSOFTv2 
 MP MRRU 1600 
 MP SHORTSEQ 
 ENDPOINTDISC [802.1] 00 02 b3 a1 52 12 
pptp0-0: ignoring SetLinkInfo 
[pptp] LCP: rec'd Configure Request #0 link 0 (Req-Sent) 
 MAGICNUM 163850eb 
 PROTOCOMP 
 ACFCOMP 
 CALLBACK 
   Not supported 
 MP MRRU 1614 
 ENDPOINTDISC [LOCAL] 50 76 8d a8 cd ea 4b 1f 9b 45 e2 43 ea 8b 68 14 00 00 00 01 
[pptp] LCP: SendConfigRej #0 
 CALLBACK 
[pptp] LCP: rec'd Configure Reject #1 link 0 (Req-Sent) 
 MP SHORTSEQ 
[pptp] LCP: SendConfigReq #2 
 ACFCOMP 
 PROTOCOMP 
 MRU 1500 
 MAGICNUM 23d72d4b 
 AUTHPROTO CHAP MSOFTv2 
 MP MRRU 1600 
 ENDPOINTDISC [802.1] 00 02 b3 a1 52 12 
[pptp] LCP: rec'd Configure Request #1 link 0 (Req-Sent) 
 MAGICNUM 163850eb 
 PROTOCOMP 
 ACFCOMP 
 MP MRRU 1614 
 ENDPOINTDISC [LOCAL] 50 76 8d a8 cd ea 4b 1f 9b 45 e2 43 ea 8b 68 14 00 00 00 01 
[pptp] LCP: SendConfigNak #1 
 MP MRRU 1600 
[pptp] LCP: rec'd Configure Ack #2 link 0 (Req-Sent) 
 ACFCOMP 
 PROTOCOMP 
 MRU 1500 
 MAGICNUM 23d72d4b 
 AUTHPROTO CHAP MSOFTv2 
 MP MRRU 1600 
 ENDPOINTDISC [802.1] 00 02 b3 a1 52 12 
[pptp] LCP: state change Req-Sent --> Ack-Rcvd 
[pptp] LCP: rec'd Configure Request #2 link 0 (Ack-Rcvd) 
 MAGICNUM 163850eb 
 PROTOCOMP 
 ACFCOMP 
 MP MRRU 1600 
 ENDPOINTDISC [LOCAL] 50 76 8d a8 cd ea 4b 1f 9b 45 e2 43 ea 8b 68 14 00 00 00 01 
[pptp] LCP: SendConfigAck #2 
 MAGICNUM 163850eb 
 PROTOCOMP 
 ACFCOMP 
 MP MRRU 1600 
 ENDPOINTDISC [LOCAL] 50 76 8d a8 cd ea 4b 1f 9b 45 e2 43 ea 8b 68 14 00 00 00 01 
[pptp] LCP: state change Ack-Rcvd --> Opened 
[pptp] LCP: phase shift ESTABLISH --> AUTHENTICATE 
[pptp] LCP: auth: peer wants nothing, I want CHAP 
[pptp] CHAP: sending CHALLENGE 
[pptp] LCP: LayerUp 
[pptp] LCP: rec'd Ident #3 link 0 (Opened) 
 MESG: MSRASV5.00 
[pptp] LCP: rec'd Ident #4 link 0 (Opened) 
 MESG: MSRAS-1-MET5326 
[pptp] CHAP: rec'd RESPONSE #1 
 Name: "john" 
 Peer name: "john" 
 Response is valid 
[pptp] CHAP: sending SUCCESS 
[pptp] LCP: authorization successful 
[pptp] LCP: phase shift AUTHENTICATE --> NETWORK 
[pptp] up: 1 link, total bandwidth 64000 bps 
[pptp] IPCP: Up event 
[pptp] IPCP: state change Starting --> Req-Sent 
[pptp] IPCP: SendConfigReq #1 
 IPADDR 172.16.105.80 
 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid 
[pptp] CCP: Open event 
[pptp] CCP: state change Initial --> Starting 
[pptp] CCP: LayerStart 
[pptp] CCP: Up event 
[pptp] CCP: state change Starting --> Req-Sent 
[pptp] CCP: SendConfigReq #1 
 MPPC 
   0x01000060: MPPE, 40 bit, 128 bit, stateless 
pptp0-0: ignoring SetLinkInfo 
[pptp] CCP: rec'd Configure Request #5 link 0 (Req-Sent) 
 MPPC 
   0x010000e1: MPPC MPPE, 40 bit, 56 bit, 128 bit, stateless 
[pptp] CCP: SendConfigNak #5 
 MPPC 
   0x01000040: MPPE, 128 bit, stateless 
[pptp] IPCP: rec'd Configure Request #6 link 0 (Req-Sent) 
 IPADDR 0.0.0.0 
   NAKing with 172.16.105.75 
 PRIDNS 0.0.0.0 
   NAKing with 172.16.105.67 
 SECDNS 0.0.0.0 
 SECNBNS 0.0.0.0 
[pptp] IPCP: SendConfigRej #6 
 SECDNS 0.0.0.0 
 SECNBNS 0.0.0.0 
[pptp] IPCP: rec'd Configure Reject #1 link 0 (Req-Sent) 
 COMPPROTO VJCOMP, 16 comp. channels, no comp-cid 
[pptp] IPCP: SendConfigReq #2 
 IPADDR 172.16.105.80 
[pptp] CCP: rec'd Configure Nak #1 link 0 (Req-Sent) 
 MPPC 
   0x01000040: MPPE, 128 bit, stateless 
[pptp] CCP: SendConfigReq #2 
 MPPC 
   0x01000040: MPPE, 128 bit, stateless 
[pptp] CCP: rec'd Configure Request #7 link 0 (Req-Sent) 
 MPPC 
   0x01000040: MPPE, 128 bit, stateless 
[pptp] CCP: SendConfigAck #7 
 MPPC 
   0x01000040: MPPE, 128 bit, stateless 
[pptp] CCP: state change Req-Sent --> Ack-Sent 
[pptp] IPCP: rec'd Configure Request #8 link 0 (Req-Sent) 
 IPADDR 0.0.0.0 
   NAKing with 172.16.105.75 
 PRIDNS 0.0.0.0 
   NAKing with 172.16.105.67 
[pptp] IPCP: SendConfigNak #8 
 IPADDR 172.16.105.75 
 PRIDNS 172.16.105.67 
[pptp] IPCP: rec'd Configure Ack #2 link 0 (Req-Sent) 
 IPADDR 172.16.105.80 
[pptp] IPCP: state change Req-Sent --> Ack-Rcvd 
[pptp] CCP: rec'd Configure Ack #2 link 0 (Ack-Sent) 
 MPPC 
   0x01000040: MPPE, 128 bit, stateless 
[pptp] CCP: state change Ack-Sent --> Opened 
[pptp] CCP: LayerUp 
  Compress using: MPPE, 128 bit, stateless 
Decompress using: MPPE, 128 bit, stateless 
[pptp] IPCP: rec'd Configure Request #9 link 0 (Ack-Rcvd) 
 IPADDR 172.16.105.75 
   172.16.105.75 is OK 
 PRIDNS 172.16.105.67 
[pptp] IPCP: SendConfigAck #9 
 IPADDR 172.16.105.75 
 PRIDNS 172.16.105.67 
[pptp] IPCP: state change Ack-Rcvd --> Opened 
[pptp] IPCP: LayerUp 
  172.16.105.80 -> 172.16.105.75 
[pptp] IFACE: Up event 
[pptp] exec: /sbin/ifconfig ng0 172.16.105.80 172.16.105.75 netmask 0xffffffff -link0 
[pptp] exec: /usr/sbin/arp -s 172.16.105.75 0:6:5b:77:46:26 pub 
[pptp] exec: 1350 ng0 inet 172.16.105.80 172.16.105.75 john 
[pptp] exec: command returned 32512 
[pptp] IFACE: Up event 
pptp0-0: ignoring SetLinkInfo 
[pptp] LCP: rec'd Terminate Request #10 link 0 (Opened) 
[pptp] LCP: state change Opened --> Stopping 
[pptp] LCP: phase shift NETWORK --> TERMINATE 
[pptp] up: 0 links, total bandwidth 9600 bps 
[pptp] IPCP: Down event 
[pptp] IPCP: state change Opened --> Starting 
[pptp] IPCP: LayerDown 
[pptp] IFACE: Down event 
[pptp] exec: /usr/sbin/arp -d 172.16.105.75 
[pptp] exec: /sbin/ifconfig ng0 down delete -link0 
[pptp] CCP: Down event 
[pptp] CCP: state change Opened --> Starting 
[pptp] CCP: LayerDown 
[pptp] CCP: Close event 
[pptp] CCP: state change Starting --> Initial 
[pptp] CCP: LayerFinish 
[pptp] LCP: SendTerminateAck #3 
[pptp] LCP: LayerDown 
[pptp] rec'd proto IP during terminate phase 
[pptp] LCP: rec'd Terminate Request #11 link 0 (Stopping) 
[pptp] LCP: SendTerminateAck #4 
[pptp] LCP: state change Stopping --> Stopped 
[pptp] LCP: phase shift TERMINATE --> ESTABLISH 
[pptp] LCP: LayerFinish 
[pptp] device: CLOSE event in state UP 
pptp0-0: clearing call 
pptp0-0: killing channel 
[pptp] PPTP call terminated 
[pptp] IFACE: Close event 
[pptp] IPCP: Close event 
[pptp] IPCP: state change Starting --> Initial 
[pptp] IPCP: LayerFinish 
[pptp] IFACE: Close event 
pptp0: closing connection with a.b.c.d:17670 
[pptp] IFACE: Close event 
[pptp] device is now in state CLOSING 
[pptp] bundle: CLOSE event in state OPENED 
[pptp] closing link "pptp"... 
[pptp] device: DOWN event in state CLOSING 
[pptp] device is now in state DOWN 
[pptp] link: CLOSE event 
[pptp] LCP: Close event 
[pptp] LCP: state change Stopped --> Closed 
[pptp] device: DOWN event in state DOWN 
[pptp] device is now in state DOWN 
[pptp] link: DOWN event 
[pptp] LCP: Down event 
[pptp] LCP: state change Closed --> Initial 
[pptp] LCP: phase shift ESTABLISH --> DEAD 
[pptp] link: DOWN event 
[pptp] LCP: Down event 
pptp0: killing connection with a.b.c.d:17670 
[pptp] IPCP: Down event 
[pptp] IFACE: Close event 
mpd: process 169 terminated 

Any suggestions are greatly appreciated as I have a bunch people who want access from 
warm comfy home, and if I give them access this way
they will all moan about it being to slow :)

Thanks, John. 

__________________________________________________________
Get your FREE personalized e-mail at http://www.canada.com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to