On 9/6/07, Mel <[EMAIL PROTECTED]> wrote: > On Thursday 06 September 2007 22:10:42 Darren Spruell wrote: > > Wondering if this is a known issue, or if anyone has suggestions to > > get it working...? > > > > Running FreeBSD 6.2-RELEASE-p4 SMP i386. > > > > I installed nvidia-driver-100.14.11 from ports (Sep. 5 snapshot), > > Linux compatibility enabled. After loading modules 'linux' and > > 'nvidia', I do: > > > > # X -configure > > # X -config /root/xorg.conf.new > > > > At this point the system spontaneously reboots. 'X -configure' runs > > fine and produces a configuration without issue, but the reboot > > occcurs when launching X. Nothing is output to screen (it flickers as > > if starting X), and nothing is written to /var/log/Xorg.0.log. I do > > get the same behavior if running 'xorgcfg'. > > > > Card info: > > > > "NV41 [Quadro FX 3450/4000 SDI] rev 162" > > > > [EMAIL PROTECTED]:0:0: class=0x030000 card=0x029b10de chip=0x00cd10de > > rev=0xa2 hdr=0x00 > > vendor = 'NVIDIA Corporation' > > class = display > > subclass = VGA > > > Section "Device" > > Identifier "Card0" > > Driver "nvidia" > > VendorName "nVidia Corporation" > > BoardName "NV41 [Quadro FX 3450/4000 SDI]" > > BusID "PCI:7:0:0" > > EndSection > > Removing BusID do anything? All those Displays sounds a bit much too. I > *strongly* recommend using nvidia-xconfig (x11/nvidia-config).
Commenting BusID has the same effect - prompt reboot. The Display subsections are pretty standard for every X configuration I've ever used; why would they cause a problem in this case? > And anything /var/log/Xorg.0.log? Using nvAgp or FreeBSD Agp? No, nothing gets to the log before reboot occurs. Not using either of nvAgp or FreeBSD Agp, that I'm aware of. I did not enable FREEBSD_AGP at build time. DS _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"