Hello, I'm running 6.2-STABLE on i386. Yesterday I purchased a 3.5" USB 2.0 Hard Drive Enclosure kit under the brand name RocketFish, model number RF-HD35. My intention was to put a couple of extra 250GB PATA drives to work.
I mounted a WD 250GB PATA drive in the enclosure and plugged it into an open USB 2.0 port. The kernel reports: VIA Technologies Inc. USB 2.0 IDE Bridge and in the logs I see: Sep 8 10:40:27 compaqnx7400 kernel: umass2: VIA Technologies Inc. USB 2.0 IDE Bridge, rev 2.00/0.05, addr 4 Sep 8 10:40:27 compaqnx7400 kernel: umass1: at uhub4 port 6 (addr 3) disconnected Sep 8 10:40:27 compaqnx7400 kernel: (da1:umass-sim1:1:0:0): lost device Sep 8 10:40:27 compaqnx7400 kernel: (da1:umass-sim1:1:0:0): removing device entry Sep 8 10:40:27 compaqnx7400 kernel: umass1: detached Sep 8 10:40:27 compaqnx7400 kernel: da1 at umass-sim2 bus 2 target 0 lun 0 Sep 8 10:40:27 compaqnx7400 kernel: da1: <WDC WD25 00JB-00REA0 20.0> Fixed Direct Access SCSI-2 device Sep 8 10:40:27 compaqnx7400 kernel: da1: 40.000MB/s transfers Sep 8 10:40:27 compaqnx7400 kernel: da1: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) Sep 8 10:40:27 compaqnx7400 kernel: umass2: Invalid CSW: tag 7 should be 8 Sep 8 10:45:32 compaqnx7400 kernel: umass2: BBB reset failed, TIMEOUT When I look at /dev/da* I see no device entries for da1. Can someone help me out getting this device functional under -STABLE? If -CURRENT is the only answer, I'm not opposed to giving that a try. Just for a sanity check, I plugged the device into both a WinXP and OS X 10.4 machine and both boxes had no issue utilizing the device. Many thanks in advance! Doug _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"