Hi List!

 I've been trying to configure my ATI 9200SE Card for tv-out, I don't seem to 
get it to work. The problem is that somehow the driver (tried vesa, ati and 
radeon drivers) can't recognise the second output. Is there anyway I can modify 
the source for these drivers to recognize the second output. I've googled my 
ass off and I'm tired! :) 

 Thanks in advance. I attach my Xorg.o.log and xorg.conf.

Regards,
J

---/var/log/Xorg.0.log-------

(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Monitor1"
(**) |   |-->Device "Card0b"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"


(II) Primary Device is: PCI 02:00:0
(II) ATI:  Candidate "Device" section "Card0".
(II) ATI:  Candidate "Device" section "Card0b".
(WW) RADEON: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset ATI Radeon 9200SE 5964 (AGP) found


(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- None
 DAC Type  -- Unknown
 TMDS Type -- NONE
 DDC Type  -- NONE

-----xorg.conf------
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Screen      1  "Screen1" Rightof "Screen0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync    40 - 50
        VertRefresh  60 - 70
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "TV"
        ModelName    "TV"
        HorizSync     30-50
        VertRefresh  100
EndSection


Section "Device"
        Identifier  "Card0"
        Driver      "ati"
        VendorName  "ATI Technologies Inc"
        BoardName   "RV280 [Radeon 9200 SE]"
        BusID       "PCI:2:0:0"
EndSection

Section "Device"
        Identifier "Card0b"
        Driver     "ati"
        VendorName "ATI Technologies Inc"
        BoardName  "RV280"
        BusID      "PCI:2:0:1"
        Screen     1
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Card0b"
        Monitor    "Monitor1"
        Option     "ConnectedMonitor" "TV"
        Option     "TVStandard" "PAL-B"
        Option     "TVOverScan" "1.0"
        DefaultColorDepth 24
        SubSection "Display"
                Depth 24
                Modes "800x600" "640x480"
        EndSubSection
EndSection
------
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to