FreeBSD version: 5.0
I try to connect a Fujitsu Memorybird, a USB mass storage device, to my
computer. When I connect it to the USB bus I get the follwing message:
umass0: Fujitsu Memorybird, rev 1.10/1.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Fujitsu Memorybird 1.06> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C)
(da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing
minimum_cmd_size to 10
And with usbdevs(8) and camcontrol(8) I can list the device:
# usbdevs -d -v -a 3 -f /dev/usb1
Controller /dev/usb1:
addr 3: full speed, power 100 mA, config 1, Memorybird(0x0100),
Fujitsu(0x0d7d), rev 1.00
umass0
# camcontrol devlist -v
scbus0 on umass-sim0 bus 0:
<Fujitsu Memorybird 1.06> at scbus0 target 0 lun 0 (da0,pass0)
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
But how do I access it? Can I access it?
Mats
-----------------------------------------------------------------
Mats Dufberg [EMAIL PROTECTED]
Blaoarvsgraend 42 +46-8-38 48 59
SE-162 45 Vaellingby, Sweden +46-70-258 2588
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
