leegold wrote:
> Hi,
Hi,

> 
> This is probably going to basic stuff, sorry to bother.
> 
> I can not get Audio Cds to play. I'm using KDE.

Please elaborate this sentence. What did you try? What error messages
did you get?

> 
> During sysinstall FreeBSD accesses CDs OK. 
> 
> It's acd0 and is a DVD-RW. For now I just want to play Audio CDs. 
> 
> Is the problem it's not mounted? He's my info:

No, you cannot mount audio cds.

> 
> $ mount
> /dev/ad2s1a on / (ufs, local)
> devfs on /dev (devfs, local)
> /dev/ad2s1g on /home (ufs, local, soft-updates)
> /dev/ad2s1e on /tmp (ufs, local, soft-updates)
> /dev/ad2s1f on /usr (ufs, local, soft-updates)
> /dev/ad2s1d on /var (ufs, local, soft-updates)


Try with:

$ cdcontrol play

> $        
> 
> $ /sbin/dmesg
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
>         reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
>     [EMAIL PROTECTED]:/usr/obj/usr/src/sys/SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2613.41-MHz
> 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x40f32  Stepping = 2
>   
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>   Features2=0x2001<SSE3,CX16>
>   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
>   AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
>   Cores per package: 2
> real memory  = 2147418112 (2047 MB)
> avail memory = 2087878656 (1991 MB)
> ACPI APIC Table: <GBT    NVDAACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 1.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
> RF5413)
> acpi0: <GBT NVDAACPI> on motherboard
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: reservation of 290, 5 (4) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <memory> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xf3102000-0xf3102fff irq 21
> at device 2.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 10 ports with 10 removable, self powered
> ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq
> 22 at device 2.1 on pci0
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 4 ports each: usb0
> usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
> usb1: USB revision 2.0
> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub1: 10 ports with 10 removable, self powered
> pcm0: <nVidia nForce4> port 0xb400-0xb4ff,0xb800-0xb8ff mem
> 0xf3104000-0xf3104fff irq 23 at device 4.0 on pci0
> pcm0: <Avance Logic ALC850 AC97 Codec>
> atapci0: <nVidia nForce CK804 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <nVidia nForce CK804 SATA300 controller> port
> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xcc00-0xcc0f mem
> 0xf3100000-0xf3100fff irq 21 at device 7.0 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> atapci2: <nVidia nForce CK804 SATA300 controller> port
> 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xe000-0xe00f mem
> 0xf3101000-0xf3101fff irq 22 at device 8.0 on pci0
> ata4: <ATA channel 0> on atapci2
> ata5: <ATA channel 1> on atapci2
> pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem
> 0xf3005000-0xf30050ff irq 19 at device 7.0 on pci1
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:00:e8:9d:02:aa
> fwohci0: <Texas Instruments TSB43AB23> mem
> 0xf3004000-0xf30047ff,0xf3000000-0xf3003fff irq 18 at device 10.0 on
> pci1
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:1a:4d:00:00:c1:d1:30
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: foobar:^)
> fwe0: Ethernet address: foobar:^)
> fwe0: if_start running deferred for Giant
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> nvidia0: <GeForce 7900 GS> port 0xa000-0xa07f mem
> 0xf0000000-0xf0ffffff,0xe0000000-0xefffffff,0xf1000000-0xf1ffffff irq 18
> at device 0.0 on pci5
> nvidia0: [GIANT-LOCKED]
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xd0000-0xd3fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> umass0: TEAC TEAC FD-05PUW, rev 2.00/0.00, addr 2
> Timecounters tick every 1.000 msec
> acd0: DMA limited to UDMA33, device found non-ATA66 cable
> acd0: DVDR <LITE-ON DVDRW SHW-1635S/YS0R> at ata0-master UDMA33
> ad2: 78166MB <Maxtor 6Y080P0 YAR41BW0> at ata1-master UDMA133
> ad4: 238474MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA300
> SMP: AP CPU #1 Launched!
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <TEAC FD-05PUW 3000> Removable Direct Access SCSI-0 device
> da0: 1.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (da0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (da0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (da0:umass-sim0:0:0:0): Medium not present
> (da0:umass-sim0:0:0:0): Unretryable error
> Opened disk da0 -> 6
> Trying to mount root from ufs:/dev/ad2s1a
> $   
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"


-- 
Pietro Cerutti

PGP Public Key:
http://gahr.ch/pgp
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to