Hello,

        I've got a 4.4-RC server that I'm attempting to upgrade all the source on. I'm 
following the directions found at: 
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html  to the 
letter to do this. My make buildworld went just fine, although I can't seem to get 
past this make buildkernel compile problem. I CVSup'd on February 1st 2003 at around 
6:00pm. It keeps failing on umass.c, the below is the offending output of the build:


===> umass
cc -O -pipe   -D_KERNEL -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes  
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -ansi 
-DKLD_MODULE -nostdinc -I-  -I. -I@ -I@/../include  -mpreferred-stack-boundary=2 -Wall 
-Wredundant-decls -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes 
-Wpointer-arith -Winline -Wcast-qual  -fformat-extensions -ansi -c 
/usr/src/sys/modules/umass/../../dev/usb/umass.c
/usr/src/sys/modules/umass/../../dev/usb/umass.c:380: syntax error before `{'
/usr/src/sys/modules/umass/../../dev/usb/umass.c:383: warning: no semicolon at end of 
struct or union
/usr/src/sys/modules/umass/../../dev/usb/umass.c:426: syntax error before `}'
*** Error code 1
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error
*** Error code 2
1 error


I don't need this, as to my knowledge it's only a USB Mass Storage driver and it isn't 
a dependency of anything else (I'm assuming). I've commented out all the USB drivers 
in both my custom and GENERIC kernel config files, and tried building with both but it 
fails with exactly the same message (why is it even trying to make it?). I'm using no 
special switches to make, simply make buildkernel KERNCONF=GENERIC with the possible 
exception of make.conf (see below). Some system information follows.


uname -a output: (hostnames have been changed)

FreeBSD listserv.local.com 4.4-RC FreeBSD 4.4-RC #0: Fri Dec 21 18:11:25 EST 2001     
root at listserv.local.com:/usr/src/sys/compile/LISTSERV  i386


make.conf:

NOPROFILE=    true     #    Avoid compiling profiled libraries
CFLAGS= -O -PIPE

My GENERIC conf file:

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.50 2002/12/30 19:04:31 rwatson Exp $

machine         i386
cpu             I386_CPU
cpu             I486_CPU
cpu             I586_CPU
cpu             I686_CPU
ident           GENERIC
maxusers        0

#makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug symbols

options         MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_DIRHASH             #Improve performance on big directories
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug 
                                        # output.  Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options        SMP                     # Symmetric MultiProcessor Kernel
#options        APIC_IO                 # Symmetric (APIC) I/O

device          isa
device          eisa
device          pci

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
device          fd1     at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device         fdc0

# ATA and ATAPI devices
device          ata0    at isa? port IO_WD1 irq 14
device          ata1    at isa? port IO_WD2 irq 15
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI Controllers
device          ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
device          ahd             # AHA39320/29320 and onboard AIC79xx devices
device          amd             # AMD 53C974 (Tekram DC-390(T))
device          isp             # Qlogic family
device          mpt             # LSI-Logic MPT/Fusion
device          ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets)
options         SYM_SETUP_LP_PROBE_MAP=0x40
                                # Allow ncr to attach legacy NCR devices when 
                                # both sym and ncr are configured

device          adv0    at isa?
device          adw
device          bt0     at isa?
device          aha0    at isa?
device          aic0    at isa?

device          ncv             # NCR 53C500
device          nsp             # Workbit Ninja SCSI-3
device          stg             # TMC 18C30/18C50

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
device          asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
device          dpt             # DPT Smartcache - See LINT for options!
device          iir             # Intel Integrated RAID
device          mly             # Mylex AcceleRAID/eXtremeRAID
device          ciss            # Compaq SmartRAID 5* series

# RAID controllers
device          aac             # Adaptec FSA RAID, Dell PERC2/PERC3
device          aacp            # SCSI passthrough for aac (requires CAM)
device          ida             # Compaq Smart RAID
device          amr             # AMI MegaRAID
device          mlx             # Mylex DAC960 family
device          twe             # 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12

device          vga0    at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device         vt0     at isa?
#options        XSERVER                 # support for X server on a vt console
#options        FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options        PCVT_SCANSET=2          # IBM keyboards are non-std

device          agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#device         card
#device         pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
#device         pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3
device          sio2    at isa? disable port IO_COM3 irq 5
device          sio3    at isa? disable port IO_COM4 irq 9

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da


# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          em              # Intel PRO/1000 adapter Gigabit Ethernet Card 
(``Wiseman'')
device          txp             # 3Com 3cR990 (``Typhoon'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device          pcn             # AMD Am79C97x PCI 10/100 NICs
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS 7016
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          tl              # Texas Instruments ThunderLAN
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device          bge             # Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
device          ex
device          ep
device          fe0     at isa? port 0x300
# Xircom Ethernet
device          xe
# PRISM I IEEE 802.11b wireless NIC.
device          awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device          wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device          an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
#device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
device          lnc0    at isa? port 0x280 irq 10 drq 0
device          cs0     at isa? port 0x300
device          sn0     at isa? port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop            # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   sl      1       # Kernel SLIP
pseudo-device   ppp     1       # Kernel PPP
pseudo-device   tun             # Packet tunnel.
pseudo-device   pty             # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif             # IPv6 and IPv4 tunneling
pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device   bpf             #Berkeley packet filter

# USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         usb             # USB Bus (required)
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         ums             # Mouse
#device         uscanner        # Scanners
#device         urio            # Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet



I am happy to provide any other information if it helps. Thank you!



--Jeremy Olmen
lilpuppie at mindspring dot com

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to