Note: If there's a more appropriate mailing list, please let me know. I've been running a FreeBSD 4.11 installation for a couple of years without issue. Unfortunately, one of the drives on the 3Ware Escalada 8500 RAID array died leaving the array in a degraded state. The drive likely died in an outage which also corrupted the filesystem. That said, the FreeBSD install is still able to boot until it attempts to mount the filesystem.
During the boot process, I get the following error: Can't stat /dev/twed0s1a: Bad file Descriptor Can't stat /dev/twed0s1a: Bad file Descriptor /dev/twed0s1a: CAN"T CHECK FILE SYSTEM /dev/twed0s1a: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY It drops me in to single user mode allowing me to run fsck. If I run just fsck then, it runs successfully but doesn't check twed0s1a which means on reboot the problem is still there. If I force fsck on that partition by running `fsck /dev/twed0s1a` then I get the same errors as above. Please let me know what other steps I should take to get the system booting again. Thanks in advance, _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"