alexus wrote:
i dont see any difference as at the end i still get this

216.112.241.24/29  216.112.241.25     UGS         0        0   fxp1

in my netstat -rn, and no its still doesn't work...



On Nov 16, 2007 12:07 PM, Steve Bertrand <[EMAIL PROTECTED]> wrote:
alexus wrote:
my private IP that eventually resolves to public IP through PIX is
different then coming from my other public IP that assigned on my fxp1
that comes from another ISP, the fxp1 IP already configured this way
so it pass everything to my box

what i've tried is adding route on my box

route add 216.112.241.24 216.112.241.25 255.255.255.248
Wait a minute...this doesn't look right...

Try this:

# route add $homeIP/$netmask $gateway

Where:

- if you have a static IP at 'home', $netmask should be /32, otherwise,
you'll need to shorten the prefix (such like /24) This will depend on
your 'home' Internet provider setup

- $gateway is the next hop upstream on the interface that has
216.112.241.x address on it.

Steve




I'm kind of new to freebsd so forgive me if I'm wrong but I thought this was not possible with freebsd in a simple way. On linux you can create a default route for each interface thus packet get routed properly, on freebsd you can only have one default route (I think) so this is not really possible.


_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to