Nevermind I remembered that I'm not running a k6/2 400 anymore and that rebuilding the kernel would not take forever
Advertising
amr0: <LSILogic MegaRAID 1.53> mem 0xf4000000-0xf400ffff irq 16 at device 4.0 on pci3 amr0: <LSILogic HP NetRAID-1M> Firmware \^H\^AH , BIOS \^B\^AG , 32MB RAM there it is! Tony -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tony Sent: Sunday, December 02, 2007 9:20 PM To: [EMAIL PROTECTED] Subject: what driver does the 80960rp use? I just installed an HP scsi card into my Dell server I'm trying to figure out driver I should add to my custom kernel. >From pciconf -lcv [EMAIL PROTECTED]:0:0: class=0x080020 card=0x11618086 chip=0x11618086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82806AA PCI64 Hub Advanced Programmable Interrupt Controller' class = base peripheral subclass = interrupt controller [EMAIL PROTECTED]:4:0: class=0x010400 card=0x60e7103c chip=0x1960101e rev=0x20 hdr=0x00 vendor = 'American Megatrends Inc.' device = '80960RP i960RP Microprocessor' class = mass storage subclass = RAID cap 01[80] = powerspec 2 supports D0 D3 current D0 >From dmesg: pci3: <ACPI PCI bus> on pcib3 pci3: <mass storage, RAID> at device 4.0 (no driver attached) uname -a FreeBSD tntpro.com 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #4: Sun Dec 2 16:14:46 EST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/LUNARXL i386 Thank you! Tony _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
