I have 2 machines (A and B) interconnected by a cable network
crossover; added the following addresses on the network card:
Machine "A": 192.168.1.1/24
Machine "B": 10.10.1.1/24
Question: How would for these machines to communicate, adding routes manually?
no way. select same subnet
Thanks
--
Celso Vianna
BSD User: 51318
http://www.bsdcounter.org
63 8404-8559
Palmas/TO
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
There shouldn't need to be any changes to the routing tables needed if they are
directly connected. If they do need to be on seperate subnets, then you can add
aliases to each interface so that they see each other as on the same subnet.
On machine "A":
# ifconfig <interface> alias 10.10.1.2 255.255.255.0 (Any number that isn't 0,
1, or 255 ought
to work for the interface address but we'll use 2 for simplicity)
On machine "B":
# ifconfig <interface> alias 192.168.1.2 255.255.255.0
Hopefully this helps you.
--
David Michael Curry (Dave)
<[EMAIL PROTECTED]>
() ASCII Ribbon Campaign | Against HTML e-mail
/\ www.asciiribbon.org | Against proprietary extensions
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
