After installed FreeBSD 6.3 on two machines, and X server cannot be
started somehow on either one.
Both "X -configure" and "X -probeonly" failed and errors are in attached
file -- Xerr.
Also, Xorg.o.log is attached.
Both machines run FreeBSD 6.2 and X works fine.
I search wiki.x.org and freebsd list, but did not see any information
related to this problem.
Can someone tell me what is going wrong on my installation or X
configuration?
Thanks,
-Jin
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.3-RELEASE i386
Current Operating System: FreeBSD mobile.Belkin 6.3-RC2 FreeBSD 6.3-RC2 #0: Sat
Jan 12 13:41:51 PST 2008 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MinMax
i386
Build Date: 01 December 2007 09:49:15PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 19 19:24:50 2008
(EE) Unable to locate/open config file
New driver is "ati"
(==) Using default built-in configuration (55 lines)
(EE) Failed to load module "ati" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "vga" (module does not exist, 0)
(EE) Failed to load module "mouse" (module does not exist, 0)
(EE) Failed to load module "kbd" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.3-RELEASE i386
Current Operating System: FreeBSD mobile.Belkin 6.3-RC2 FreeBSD 6.3-RC2 #0: Sat
Jan 12 13:41:51 PST 2008 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MinMax
i386
Build Date: 01 December 2007 09:49:15PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 19 19:24:59 2008
Missing output drivers. Configuration failed.
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 6.3-RELEASE i386
Current Operating System: FreeBSD mobile.Belkin 6.3-RC2 FreeBSD 6.3-RC2 #0: Sat
Jan 12 13:41:51 PST 2008 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/MinMax
i386
Build Date: 01 December 2007 09:49:15PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 19 19:24:59 2008
(II) Loader magic: 0x81af380
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on freebsd
(II) LoadModule: "pcidata"
(II) Loading /usr/local/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000a108, mode1Res1 = 0x80000000
(WW) OS did not count PCI devices, guessing wildly
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,30ae rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:05:0: chip 1002,5a37 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:13:0: chip 1002,4374 card 1002,4374 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 1002,4375 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 1002,4373 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 103c,30ae rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 103c,30ae rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:14:5: chip 1002,4370 card 103c,30ae rev 02 class 04,01,00 hdr 80
(II) PCI: 00:14:6: chip 1002,4378 card 103c,30ae rev 02 class 07,03,00 hdr 80
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,5955 card 103c,30ae rev 00 class 03,00,00 hdr 00
(II) PCI: 06:02:0: chip 14e4,4318 card 103c,1355 rev 02 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 10ec,8139 card 103c,30a4 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xc0100000 - 0xc01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:5:0), (0,2,3), BCTRL: 0x0000 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:20:4), (0,6,7), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xc0200000 - 0xc02fffff (0x100000) MX[B]
(--) PCI:*(1:5:0) ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) rev 0,
Mem @ 0xc8000000/27, 0xc0100000/16, I/O @ 0x9000/8
Missing output drivers. Configuration failed.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
