darn... there we go again, i forgot to give the version i am running.
I have FreeBSD 6.3-STABLE, xorg 7.3_1 and yes with the
x11-drivers/xf86-video-intel port installed. I fell back to
915resolution since this intel driver failed. I was hoping to get some
joy with 915resolution, but realised that it does not support this
chipset as well :-(.
I deinstalled the intel driver and installed the i810 driver, but no
joy either. Im back to the intel driver and i still cannot get
1280x800 done. every time i startx i get the error i described
earlier. I checked and /dev/agpgart does not exist. Im sure i compiled
my kernel with "device agp".
thanks for the assistance.
On 1/31/08, Doug Poland <[EMAIL PROTECTED]> wrote:
> Mike Barnard wrote:
> > Hi, I have an HP Compaq 6720s laptop. I am trying to get X to display
> > at 1280x800 screen reolution.
> > I first set it up using xorgconfig, but i failed to start X. I got an
> > error saying
> > intel: No matching device section for instance (BUS ID PCI:0:2:1) found
> > GARTInt Unable to open /dev/agpgart (No such file or directory)
> > I tried to use the 915resolution port and this is what it give me.
> > # 915resolution -l
> > Intel 800/900 Series VBIOS Hack : version 0.5.3
> > Intel chipset detected. However, 915resolution was unable to
> > determine the chipset type.
> > Chipset Id: 2a008086
> > Please report this problem to [EMAIL PROTECTED]
> > #
> > I know that i have the Intel x3100 card and then 965GM chipset.
> > Has anyone managed to get X to display on a wide screen display at
> > 1280x800 on this chipset?
> If you're running FreeBSD 7.x and Xorg 7.3, I recommend using the
> "intel" driver. 915resolution is not necessary with this driver.
Of course, you might discount this possibility, but remember that one in
a million chances happen 99% of the time.
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"