On Feb 1, 2008 2:46 PM, cpghost <[EMAIL PROTECTED]> wrote:
> You could also run the following command immediatly, without having
> to wait for the daemon to collect data:
>
>   # smartctl -a /dev/ad6
>
> and consider running a long test as well:
>
>   # smartctl -t long /dev/ad6
>
> followed by another "smartctl -a /dev/ad6" again once the
> test completes (the drive will tell you how long it takes,
> expect something like 30 to 45 minutes or so, depending on
> the size and speed of the drive).
>
> > Kurt
>
> -cpghost.

Output from smartctl -a /dev/ad6 - looks pretty clean AFAICT.

smartctl version 5.37 [i386-portbld-freebsd6.3] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE (Serial ATA) family
Device Model:     WDC WD800JD-00MSA1
Serial Number:    WD-WMAM9HU64068
Firmware Version: 10.01E01
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Feb  2 15:52:58 2008 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an
interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (2460) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection
on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  33) minutes.
Conveyance self-test routine
recommended polling time:        (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail
Always       -       0
  3 Spin_Up_Time            0x0003   165   165   021    Pre-fail
Always       -       2725
  4 Start_Stop_Count        0x0032   100   100   000    Old_age
Always       -       26
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail
Always       -       0
  9 Power_On_Hours          0x0032   092   092   000    Old_age
Always       -       5948
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail
Always       -       0
 11 Calibration_Retry_Count 0x0012   100   253   051    Old_age
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       26
190 Temperature_Celsius     0x0022   073   062   045    Old_age
Always       -       27
194 Temperature_Celsius     0x0022   116   105   000    Old_age
Always       -       27
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   199   000    Old_age
Always       -       925
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

zsquid# less out.txt
smartctl version 5.37 [i386-portbld-freebsd6.3] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE (Serial ATA) family
Device Model:     WDC WD800JD-00MSA1
Serial Number:    WD-WMAM9HU64068
Firmware Version: 10.01E01
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Feb  2 15:52:58 2008 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an
interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (2460) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection
on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  33) minutes.
Conveyance self-test routine
recommended polling time:        (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail
Always       -       0
  3 Spin_Up_Time            0x0003   165   165   021    Pre-fail
Always       -       2725
  4 Start_Stop_Count        0x0032   100   100   000    Old_age
Always       -       26
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail
Always       -       0
  9 Power_On_Hours          0x0032   092   092   000    Old_age
Always       -       5948
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail
Always       -       0
 11 Calibration_Retry_Count 0x0012   100   253   051    Old_age
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age
Always       -       26
190 Temperature_Celsius     0x0022   073   062   045    Old_age
Always       -       27
194 Temperature_Celsius     0x0022   116   105   000    Old_age
Always       -       27
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   199   000    Old_age
Always       -       925
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to