My feeling is that's something in my router that BSD doesn't like and
Linux doesn't care
(since it works).

Instead of posting my custom kernel config, I decided that I will give
it another two radical tries:
- first, I'll compile a generic kernel
- second, if the first attempt is unsuccessful, I will try a complete
reinstall of FreeBSD, to
get rid of all the configuration tweaks I made

If it will not work after that, I will remove BSD from my system.
I don't want to waste your time and mine dealing with this annoying
issue anymore.

Thanks a lot,
Eugen

On Feb 7, 2008 10:07 AM, Derek Ragona <[EMAIL PROTECTED]> wrote:
>
>  At 08:24 PM 2/6/2008, Eugen wrote:
>
> I tried everything you guys told me and it still doesn't work :
>
>  - tried to set a static address as Derek indicated
>  - commented out the ipv6 line in rc.conf, even if it was already set to
> "NO"
>  - the answer to Kevin's questions follow:
>
>  # ping -I dc0 192.168.1.1
>  ping: invalid multicast interface: `dc0'
>
>  # arp -a
>  ? (192.168.1.1) at (incomplete) on dc0 [ethernet]
>
>  # ifconfig -a
>  dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>          options=8<VLAN_MTU>
>          ether 00:14:cf:52:b4:17
>          inet 192.168.1.33 netmask 0xffffff00 broadcast 192.168.1.255
>          media: Ethernet autoselect (100baseTX <full-duplex>)
>          status: active
>  lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>          inet6 ::1 prefixlen 128
>          inet 127.0.0.1 netmask 0xff000000
>
>  ping 192.168.1.1 and traceroute 192.168.1.1 give "Network is unreachable"
>
>  I even connected directly to the cable modem as it was before I bought the
>  router and... surprise: it works! Put the router back and BSD stops working
>  again. I'm writing this post from Linux, so this one works.
>  When it is connected directly to the router, what IP are you using then?
> Can you post your
>  ifconfig -a
>  output then, and when it is connected to the router.
>
>  What router are you using?  How do you have it set-up?  What are the IP
> settings for the router?  What are the DHCP settings?  Can the router ping
> itself or other hosts?
>
>          -Derek
>
>
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to