Alright, I have the machine up to 6.3-STABLE #1 now. I've changed
subnets on the one card that pushes the traffic. There is a run down of
the machine now. The machine is still having the weird network traffic
problem of capping at around 100mbps and then dropping to 10~20mbps the
next minute. Any suggestions?
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet 192.168.X.X netmask 0xffffff00 broadcast 192.168.1.255
ether 00:1b:fc:ef:34:de
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet X.X.X.X netmask 0xffffff80 broadcast X.X.X.127
ether 00:1b:fc:ef:34:df
media: Ethernet 1000baseTX <full-duplex>
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
Derek Ragona wrote:
At 10:01 AM 2/13/2008, Victor Farah wrote:
I'm updating the system to 6.3-release now.
All 13 machines are on the same subnet but they are scattered across
different switchs.
netstat -m:
7716/399/8115 mbufs in use (current/cache/total)
7388/326/7714/25600 mbuf clusters in use (current/cache/total/max)
7380/41 mbuf+clusters out of packet secondary zone in use (current/cache)
0/0/0/0 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/0 9k jumbo clusters in use (current/cache/total/max)
0/0/0/0 16k jumbo clusters in use (current/cache/total/max)
16705K/751K/17456K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/6/6656 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
193374 calls to protocol drain routines
ifconfig -a:
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 192.168.X.X netmask 0xffffff00 broadcast 192.168.X.255
ether 00:1b:fc:ef:34:de
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet X.X.X.X netmask 0xffffff00 broadcast X.X.X.255
ether 00:1b:fc:ef:34:df
media: Ethernet 1000baseTX <full-duplex>
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
What IP's are you trying to configure on em0 and em1? These cannot be
on the same subnet unless you are trying to bond them, which I don't
believe is available in 6.X.
-Derek
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
