Is your wireless network a non-authentication one, if it is wpa, wep,
you may want to try follow the handbook.
I am not using rc.conf to start my wireless, but I think give the ssid
in rc.conf may help, because there may be more wireless network in
your area if it is a non-authentication one.
ifconfig_ath0="ssid your_ssid_here DHCP"
After you give the ssid, what the ifconfig output?
Does the status change to associate?
If yes, you can try:
to get the ip from DHCP.
On 21/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote:
> > > > > On 19/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote:
> > > > > Is anybody using usr5410? With what driver? And what version of FBSD?
> > > > >
> > > > On Wed, Feb 20, 2008 at 12:21:22PM +0000, Kemian Dang wrote:
> > > > Try ndis, it works for my broadcom wireless adapter.
> > >
> > > On 20/02/2008, Anton Shterenlikht <[EMAIL PROTECTED]> wrote:
> > > I added ndis to the kernel and built the kernel module using
> > > http://www.linuxant.com/usr11gv40q.zip driver.
> > >
> > > However, when I load the module:
> > > I get errors. From dmesg:
> > >
> > > cardbus1: Expecting link target, got 0xed
> > > cardbus1: Resource not specified in CIS: id=10, size=2000
> > > cardbus1: Resource not specified in CIS: id=14, size=20000
> > > ndis0: <U.S. Robotics 802.11g Wireless Turbo Adapter> mem
> 0x88020000-0x88021fff,0x88000000-0x8801ffff irq 11 at device 0.0 on cardbus1
> > > ndis0: NDIS API version: 5.1
> > > ndis0: init handler failed
> > > device_attach: ndis0 attach returned 6
> > >
> > > What am I doing wrong?
> > On Wed, Feb 20, 2008 at 04:39:22PM +0000, Kemian Dang wrote:
> > Try add it to the /boot/loader.conf and restart to see whether it works.
> > My ndis0 can not get response from "ifconfig ndis0 scan", but I can
> > give it the ssid manually and make it work.
> thanks, it seems to be detected now, from dmesg:
> cardbus1: Expecting link target, got 0xfd
> cardbus1: Resource not specified in CIS: id=10, size=2000
> cardbus1: Resource not specified in CIS: id=14, size=20000
> ndis0: <U.S. Robotics 802.11g Wireless Turbo Adapter> mem
> 0x88000000-0x8801ffff irq 11 at device 0.0 on cardbus1
> ndis0: NDIS API version: 5.1
> ndis0: Ethernet address: 00:c0:49:a9:22:59
> I still cannot connect to the wireless network, but this
> is probably another problem..
> # ifconfig ndis0 up scan
> SSID BSSID CHAN RATE S:N INT CAPS
> UoB-Wireless 00:16:c7:71:9d:63 1 52M 18:0 100 E
> # tail /etc/rc.conf
> # /etc/rc.d/netif start
> ndis0: no link .............. giving up
> ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> ether 00:c0:49:a9:22:59
> media: IEEE 802.11 Wireless Ethernet autoselect
> status: no carrier
> ssid "" channel 1
> authmode OPEN privacy OFF txpowmax 100 bmiss 7
> I also tried
> # ifconfig ndis0 ssid UoB-Wireless
> but that didn't help.
> I'll try to update the driver version from 4.0q to 6.0b15, but
> the latter is not working fine yet. I think it is because I mixed
> different versions of inf, sys and firmware.
> many thanks
> Anton Shterenlikht
> Room 2.6, Queen's Building
> Mech Eng Dept
> Bristol University
> University Walk, Bristol BS8 1TR, UK
> Tel: +44 (0)117 928 8233
> Fax: +44 (0)117 929 4423
email@example.com mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"