I just installed FreeBSD 7.0 w/ a 3ware 9650SE-24M8 controller. I set the controller to export JBOD disks but they don't show up in FreeBSD for some reason. I have verified that they do show up in CentOS so I don't think the controller is setup wrong. If I create an array it will show up in FreeBSD as da0. I have tried disabling the onboard sata controller as well to see if that made a difference. Also I couldn't find anything else in the kernel that might pertain to this. BTW I had to use the onboard sata controller for the install because the disks were not showing up.
uname -a: FreeBSD localhost 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun Mar 9 06:00:53 UTC 2008 [EMAIL PROTECTED]:/usr/src/sys/amd64/compile/LDS amd64 Potentialy relevent dmesg output: 3ware device driver for 9000 series storage controllers, version: 3.70.05.001 twa0: <3ware 9000 series Storage Controller> port 0x3000-0x30ff mem 0xd8000000-0xd9ffffff,0xda300000-0xda300fff irq 18 at device 0.0 on pci9 twa0: [ITHREAD] twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue: twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-24M8, 24 ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004 da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9650SE-24M DISK 3.08> Fixed Direct Access SCSI-5 device da0: 100.000MB/s transfers da0: 5721984MB (11718623232 512 byte sectors: 255H 63S/T 729450C) FreeBSD has no problems detecting the disk w/ the onboard sata controller: ad4: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata2-master SATA300 ad6: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata3-master SATA300 ad8: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata4-master SATA300 ad10: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata5-master SATA300 ad12: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata6-master SATA300 ad14: 953869MB <Hitachi HDS721010KLA330 GKAOA70M> at ata7-master SATA300 Thanks, William _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"