* Added Option "DPMS" to Monitor section (by suggestion of list member)
* Added Option "NoDDC" to Device section (by suggestion of list member)
* Changed Device section to now read as follows, from i810 man page... (in short, was using the vga driver, changed to the i810 driver.)
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "VGAClocks" # [<bool>]
#VideoRam 16
Option "NoDDC"
Identifier "Intel i810"
Driver "i810"
VendorName "Intel"
BoardName "i810-dc100"
BusID "PCI:0:1:0"
EndSection
The problem now is that when I run "XFree86 -xf86config ./XF86Config.new", it looks like the X display is coming up but all it shows me is a 1 inch by 1 inch white square surrounded by a screen of staticy purplish, bluish, and greenish lines.. and stays. Desktop never displays.
The log file shows lines like this, with the following error:
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
[...]
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (Unknown error: 999()
drmOpenDevice: Open failed
drmOpenDevice: Open failed
(II) I810(0): [drm] drmOpen failed
(EE) I810(0): [dri] DRIScreenInit failed. Disabling DRI.
Any other suggestions?
DS
+++ Darren Spruell [freebsd] [10-02-03 11:07 -0700]:
| Date: Mon, 10 Feb 2003 11:07:22 -0700
| From: Darren Spruell <[EMAIL PROTECTED]>
| Subject: X problems on i810 | AddScreen/ScreenInit failed
| | Greetz,
| | I'm trying to configure v4.7 to run X but am having a hard time getting | the server to start.
| | I've followed the config instructions at | http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x-config.html | by doing the following steps:
| | Run XFree86 -configure
| to create the default XF86Config.new
| Run XFree86 -xf86config ./XF86Config.new
| to ensure that it works w/my hardware
| Edit it to taste, to change specifics for HorizSync, VertRefresh, and
| the Display subsection under "Screen".
| | However, running 'XFree86 -xf86config ./XF86Config.new' after changing | my config does not work. The output error is:
| | ======================================================================
| (==) VGA(0): Write-combining range (0xa0000,0x10000) was already clear
| | Fatal server error:
| AddScreen/ScreenInit failed for driver 0
| ======================================================================
| | I followed through the part in the Advanced Configuration section about | adding in support for agpgart and created the device node and added the | following to /boot/loader.conf:
| agp_load="YES"
| | dmesg now shows:
| Preloaded elf module "agp.ko" at 0xc051a09c.
| agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem | 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
| | Here is the current XF86Config.new (non-working). The Monitor section | was taken from a specs page on the Monitor (Gateway EV700). Full dmesg | included below this:
| | Section "ServerLayout"
| Identifier "XFree86 Configured"
| Screen 0 "Screen0" 0 0
| InputDevice "Mouse0" "CorePointer"
| InputDevice "Keyboard0" "CoreKeyboard"
| EndSection
| | Section "Files"
| RgbPath "/usr/X11R6/lib/X11/rgb"
| ModulePath "/usr/X11R6/lib/modules"
| FontPath "/usr/X11R6/lib/X11/fonts/misc/"
| FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
| FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
| FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
| FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
| EndSection
| | Section "Module"
| Load "dbe"
| Load "dri"
| Load "extmod"
| Load "glx"
| Load "pex5"
| Load "record"
| Load "xie"
| Load "xtrap"
| Load "speedo"
| Load "type1"
| EndSection
| | Section "InputDevice"
| Identifier "Keyboard0"
| Driver "keyboard"
| EndSection
| | Section "InputDevice"
| Identifier "Mouse0"
| Driver "mouse"
| Option "Protocol" "MouseSystems"
| Option "Device" "/dev/sysmouse"
| EndSection
| | Section "Monitor"
| Identifier "Monitor0"
| VendorName "Gateway"
| ModelName "EV700"
| HorizSync 30 - 69
| VertRefresh 50 - 110
| EndSection
| | Section "Device"
| ### Available Driver options are:-
| ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
| ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
| ### [arg]: arg optional
| #Option "ShadowFB" # [<bool>]
| #Option "VGAClocks" # [<bool>]
| Identifier "Card0"
| Driver "vga"
| VendorName "Intel"
| BoardName "i810-dc100"
| BusID "PCI:0:1:0"
| EndSection
| | Section "Screen"
| Identifier "Screen0"
| Device "Card0"
| Monitor "Monitor0"
| DefaultDepth 16
| SubSection "Display"
| Depth 16
| Modes "1024x768"
| EndSubSection
| EndSection
| | Copyright (c) 1992-2002 The FreeBSD Project.
| Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
| The Regents of the University of California. All rights reserved.
| FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
| [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
| Timecounter "i8254" frequency 1193182 Hz
| CPU: Pentium III/Pentium III Xeon/Celeron (697.88-MHz 686-class CPU)
| Origin = "GenuineIntel" Id = 0x686 Stepping = 6
| | Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
| real memory = 267124736 (260864K bytes)
| avail memory = 254693376 (248724K bytes)
| Preloaded elf kernel "kernel" at 0xc051a000.
| Preloaded elf module "agp.ko" at 0xc051a09c.
| Pentium Pro MTRR support enabled
| md0: Malloc disk
| Using $PIR table, 11 entries at 0xc00f35a0
| npx0: <math processor> on motherboard
| npx0: INT 16 interface
| pcib0: <Intel 82810-DC100 (i810-DC100 GMCH) Host To Hub bridge> on | motherboard
| pci0: <PCI bus> on pcib0
| agp0: <Intel 82810-DC100 (i810-DC100 GMCH) SVGA controller> mem | 0xffa80000-0xffafffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
| pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
| pci1: <PCI bus> on pcib1
| fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem | 0xff700000-0xff7fffff,0xff8ff000-0xff8fffff irq 3 at device 1.0 on pci1
| fxp0: Ethernet address 00:03:47:0b:0e:20
| inphy0: <i82555 10/100 media interface> on miibus0
| inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
| isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
| isa0: <ISA bus> on isab0
| atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 | on pci0
| ata0: at 0x1f0 irq 14 on atapci0
| ata1: at 0x170 irq 15 on atapci0
| uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at | device 31.2 on pci0
| usb0: <Intel 82801AA (ICH) USB controller> on uhci0
| usb0: USB revision 1.0
| uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
| uhub0: 2 ports with 2 removable, self powered
| pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
| chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port | 0xef00-0xef3f,0xe800-0xe8ff irq 9 at device 31.5 on pci0
| orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xccfff on isa0
| fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
| fdc0: FIFO enabled, 8 bytes threshold
| fd0: <1440-KB 3.5" drive> on fdc0 drive 0
| atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
| atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
| kbd0 at atkbd0
| psm0: failed to get data.
| psm0: <PS/2 Mouse> irq 12 on atkbdc0
| psm0: model IntelliMouse, device ID 3
| vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
| sc0: <System console> at flags 0x100 on isa0
| sc0: VGA <16 virtual consoles, flags=0x300>
| sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
| sio0: type 16550A
| sio1: configured irq 3 not in bitmap of probed irqs 0
| ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
| ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
| ppc0: FIFO with 16/16/8 bytes threshold
| plip0: <PLIP network interface> on ppbus0
| lpt0: <Printer> on ppbus0
| lpt0: Interrupt-driven port
| ppi0: <Parallel I/O> on ppbus0
| ad0: 14324MB <QUANTUM FIREBALLlct15 15> [29104/16/63] at ata0-master UDMA66
| acd0: MODE_SENSE_BIG trying to write on read buffer
| acd0: MODE_SENSE_BIG - NO SENSE asc=0x00 ascq=0x00 error=0x04
| acd0: CDROM <CD-224E> at ata1-slave PIO4
| Mounting root from ufs:/dev/ad0s1a
| WARNING: / was not properly dismounted
| | | THANKS IN ADVANCE!!!
| | - -- | Darren Spruell
| Sento IS Department
| [EMAIL PROTECTED]
| | ------------------------------
| | End of questions-digest V5 #1894
| ********************************
| | To Unsubscribe: send mail to [EMAIL PROTECTED]
| with unsubscribe freebsd-questions-digest in the body of the message
-- Darren Spruell Sento IS Department [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
