Thanks John,

But unfortunately adjusting the vsync and hsync didn't make any difference.
I did have a working XF86Config under Linux (XFree86 4.2.0 )but I haven't got a copy of that anymore , so it should be possible ! Just don't know what the magic parameter is to add to or change in the X11 Config file.

rgds,

Peter

John Murphy wrote:

Peter van Eck <[EMAIL PROTECTED]> wrote:


I'm still having toruble to get my X window system to run properly.
It loads the X server succesfull but the display is isshowing 3 Vertical
stripes thru the Desktop.
The frequencies seem OK , but it is like the desktop is split up in 3.
USing an HP Ultra VGA 15 inch Monitior + a S3 Trio32/64 videocard .
XFree86 4.2.0

Anyone a suggestion for me to check/change ?


Section "Monitor"
Identifier "Monitor0"
HorizSync 30.0 - 86.0
VertRefresh 50.0 - 130.0
EndSection

I think your monitor would not be able to cope with those ranges.
The HP Ultra VGA 17 seems to be limited to 30-64 Khz / 50-90 Hz.
The 15 inch is probably the same. The effect you're seeing is
probably the result of the Horiz. frequency being way too high.

If reducing those ranges doesn't help, you could try it without
the 3dfx accelerator card.

John.


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message


Reply via email to