2008/3/25, Christopher Cowart <[EMAIL PROTECTED]>: > Hello, > > I was in the process of upgrading from 6.2 to 7.0. After the > installkernel, I rebooted into single, only to find the mountroot > prompt: > > | Trying to mount root from ufs:/dev/ad2s1a > | > | Manual root filesystem specification: > | <fstype>:<device> Mount <device> using filesystem <fstype> > | eg. ufs:da0s1a > | ? List valid disk boot devices > | <empty line> Abort manual input > | > | mountroot> ? > | > | List of GEOM managed disk devices: > | acd0 fd0 > > Boot messages for 7.0 (grep -i ata dmesg-7.0): > | atapci0: <Intel 6300ESB SATA150 controller> port > | 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1470-0x147f at device 31.2 > | on pci0 > | ata0: <ATA channel 0> on atapci0 > | ata0: [ITHREAD] > | ata1: <ATA channel 1> on atapci0 > | ata1: [ITHREAD] > | acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata0-master UDMA33 > > Boot messages for 6.2 (grep -i ata dmesg-6.2): > | atapci0: <Intel 6300ESB SATA150 controller> port > | 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1470-0x147f at device 31.2 > | on pci0 > | ata0: <ATA channel 0> on atapci0 > | ata1: <ATA channel 1> on atapci0 > | acd0: CDROM <LG CD-ROM CRN-8245B/1.16> at ata0-master UDMA33 > | ad2: 76324MB <Seagate ST380013AS 3.25> at ata1-master SATA150 > > Any ideas where my harddrive went? I can `boot kernel.old' without any > problems. I think this post [1] might be related. Unfortunately, the > problem went away for the person who submitted the referenced PR. > > [1] http://lists.freebsd.org/pipermail/freebsd-i386/2008-January/006239.html > >
Hey, I have same problem with my old computer: atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 2.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] ad1: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-slave UDMA33 acd0: CDRW <CD-W540E/1.0C> at ata1-master UDMA33 Also, it waits 10 seconds after "ata0: <ATA channel 0> on atapci0", true ? If you reboot 3-4 times it will pass and everything will work normally. Then, I tried with disabled ACPI and it booted always without problems. However, then I recompiled GENERIC kernel because of HPLIP and now situation is opposite: it always boots with ACPI but not with ACPI. Very strange... SergiM _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
