On Tuesday 15 April 2008 04:36:26 Da Rock wrote: > On Tue, 2008-04-15 at 01:30 +0200, Danny Pansters wrote: > > On Monday 14 April 2008 12:25:14 Victor M. Blood wrote: > > > On 14.04.2008, Da Rock wrote: > > > > On Mon, 2008-04-14 at 11:02 +0400, Victor M. Blood wrote: > > > >> Hi, All. > > > >> > > > >> Anyone run tuner on phillips chip 7133/7135 on freebsd, I try to use > > > >> saa driver, devices saa0, sau0, cii0 is present in /dev/ , kbtv > > > >> runs, but freeze on begin chanel tunin... > > > >> > > > >> How to test tuner and drivers works or not. > > > > > > > > I haven't had success yet- but I have an E506AR. Where did you get > > > > the drivers from? I couldn't get access myself. > > > > > > saa_driver included in kbtv distrib, and can be found in inet, driver > > > homepage is broken. I-m install it from port kbtv, the nessasary > > > bsd-patche within distrib tarball > > > > I suspect your tuner (terratec?) is not amongst the supported ones. > > Both are Avermedia actually as posted, and yes they're only marginally > supported. So far only the analogue works (possibly).
Avermedia is not a type or brand of tuner. They're a HW company that assemble certain cards/sticks from parts such as tuners, decoders etc. > > That saa driver- I thought there was a problem with the site, but I had Saa driver is still available from purpe.com, but only from a direct download link (there's no page anymore): http://download.purpe.com/files/saa-REL_14.tgz > no idea it could be downloaded with kbtv. I thought it was only compiled > with support for the driver, not the driver itself. kbtv1 includes it also, for convenience, and because its needed for the saa backend anyway (well, some header). The saa driver only covers video and audio (I only use "shunted" audio with kbtv, not real audio capture). Tuner support is all userspace (directly via iic device). The generic tuner support that comes with the driver (as example sort of) seems to indicate that this is for a class of tuners that has three fixed bands and must be set to switch between it (as in Philips reference design). TDA and MKn init require some extra iic babble. Modern silicon tuners work differently and have quite different registers that need to be set for tuning. HTH, Dan > > _______________________________________________ > firstname.lastname@example.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"