From: "Dirk-Willem van Gulik" <[EMAIL PROTECTED]> > > > On Thu, 13 Feb 2003, Philip Murray wrote: > > > Has anyone got this working? I can't seem to get any values from any of the > > monitors in the ports collection (consolehm, xmbmon, lmmon, healthd). > > Do a verbose boot (-v flag) - does it show these devices connecting to the > hardware ? >
I didn't see anything that looked anything like a temperature sensor. However, I've attached the dmesg for someone who might know what they're looking for.
Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-RELEASE-p4 #3: Thu Feb 13 10:20:27 NZDT 2003 [EMAIL PROTECTED]:/raid5/obj/raid5/src/sys/ALLADIN Calibrating clock(s) ... TSC clock: 2395576928 Hz, i8254 clock: 1193017 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium 4 (2395.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 2147418112 (2097088K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003cc000 - 0x7ffe7fff, 2143404032 bytes (523292 pages) avail memory = 2087960576 (2039024K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 Programming 16 pins in IOAPIC #2 Programming 16 pins in IOAPIC #3 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000 io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000 io3 (APIC): apic id: 11, version: 0x000f0011, at 0xfec03000 bios32: Found BIOS32 Service Directory header at 0xc00fdb70 bios32: Entry = 0xfdb80 (c00fdb80) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xdba1 pnpbios: Found PnP BIOS data at 0xc00f4a80 pnpbios: Entry = f0000:3924 Rev = 1.0 Other BIOS signatures found: ACPI: 000ff900 Preloaded elf kernel "kernel" at 0xc03a2000. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x800078ac pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00171166) Using $PIR table, 11 entries at 0xc00f5080 pcib-: pcib0 exists, using next available unit number pcib-: pcib0 exists, using next available unit number pcib-: pcib0 exists, using next available unit number pcib-: pcib0 exists, using next available unit number npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x1166, dev=0x0017, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0017, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 IOAPIC #1 intpin 10 -> irq 2 Freeing (NOT implemented) redirected PCI irq 5. found-> vendor=0x8086, dev=0x1229, revid=0x0c class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=2 map[10]: type 1, range 32, base fd9fc000, size 12 map[14]: type 1, range 32, base 0000c000, size 6 map[18]: type 1, range 32, base fd980000, size 17 IOAPIC #1 intpin 13 -> irq 5 Freeing (NOT implemented) redirected PCI irq 11. found-> vendor=0x1002, dev=0x4752, revid=0x27 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base fc000000, size 24 map[14]: type 1, range 32, base 0000c800, size 8 map[18]: type 1, range 32, base fd9ff000, size 12 IOAPIC #1 intpin 14 -> irq 9 found-> vendor=0x8086, dev=0x1229, revid=0x0d class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fd9fd000, size 12 map[14]: type 1, range 32, base 0000c400, size 6 map[18]: type 1, range 32, base fd9a0000, size 17 found-> vendor=0x1166, dev=0x0201, revid=0x93 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0212, revid=0x93 class=01-01-8a, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 000001f0, size 3 map[14]: type 1, range 32, base 000003f4, size 2 map[18]: type 1, range 32, base 00000170, size 3 map[1c]: type 1, range 32, base 00000374, size 2 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x1166, dev=0x0220, revid=0x05 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base fd9fe000, size 12 found-> vendor=0x1166, dev=0x0225, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0101, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1166, dev=0x0101, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 pci0: <PCI bus> on pcib0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem 0xfd980000-0xfd99ffff,0xfd9fc000-0xfd9fcfff irq 2 at device 4.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:02:b3:c0:6d:6f fxp0: PCI IDs: 8086 1229 8086 1040 000c fxp0: Dynamic Standby mode is disabled inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 5.0 irq 5 fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem 0xfd9a0000-0xfd9bffff,0xfd9fd000-0xfd9fdfff irq 9 at device 6.0 on pci0 fxp1: using memory space register mapping fxp1: Ethernet address 00:30:48:51:92:8c fxp1: PCI IDs: 8086 1229 8086 1050 000d fxp1: Dynamic Standby mode is disabled inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp1 attached isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI 00 00 ata0-master: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=03 ostat0=7f ostat2=7f ata1-master: ATAPI 7f 7f ata1-slave: ATAPI 7f 7f ata1: mask=03 stat0=7f stat1=7f ata1-master: ATA 7f 7f ata1-slave: ATA 7f 7f ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfd9fe000-0xfd9fefff irq 10 at device 15.2 on pci0 ohci0: (New OHCI DeviceId=0x02201166) usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 2 -> irq 11 Freeing (NOT implemented) redirected PCI irq 10. found-> vendor=0x13c1, dev=0x1001, revid=0x01 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 4 map[14]: type 1, range 32, base feaffc00, size 4 map[18]: type 1, range 32, base fe000000, size 23 pci1: <PCI bus> on pcib1 twe0: <3ware Storage Controller> port 0xd800-0xd80f mem 0xfe000000-0xfe7fffff,0xfeaffc00-0xfeaffc0f irq 11 at device 2.0 on pci1 twe0: AEN: <soft reset> twe0: 8 ports, Firmware FE7X 1.05.00.023, BIOS BE7X 1.08.00.036 twe0: Monitor ME7X 1.01.00.034, PCB Rev3 , Achip V3.20 , Pchip V1.30 twe0: port 0: ST3120024A 114473MB twe0: port 1: ST3120024A 114473MB twe0: port 2: ST3120024A 114473MB twe0: port 3: ST3120024A 114473MB twe0: port 4: ST3120024A 114473MB twe0: port 5: ST3120024A 114473MB twe0: port 6: ST3120024A 114473MB twe0: port 7: ST3120024A 114473MB pcib2: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib3: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 pcib4: <Host to PCI bridge> on motherboard pci4: <PCI bus> on pcib4 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9800-0xca7ff,0xca800-0xcb7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x43 0x53 0x43 0x43 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x43 0x4b 0x43 0x43 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 9, 10, 11, 14, 15, apic_imen: 0x00ff3121 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 bpf: sl0 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 6800cc40, tty 6300009a, net 6700029e SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff ad0: success setting UDMA5 on ServerWorks chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <ST380023A/3.33> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 twed0: <RAID5, Normal> on twe0 twed0: 686834MB (1406637312 sectors) Creating DISK twed0 twe0: command interrupt Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 156296384, size 156296322 : OK start_init: trying /sbin/init twed0s1: type 0xa5, start 63, end = 1406635334, size 1406635272 : OK twed0s1: type 0xa5, start 63, end = 1406635334, size 1406635272 : OK Linux ELF exec handler installed