Christer Solskogen wrote:
Derek Ragona wrote:
Sounds like you have 0.0.0.0 configured on an ethernet interface. I
would check all your systems, and be sure it isn't used.
I checked, and there is no interface with that ip address. But thanks
for the advice.
OpenBSD box - where 0.0.0.0 is resolving to.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet autoselect (100baseTX full-duplex)
inet6 fe80::201:c0ff:fe03:7c09%rl0 prefixlen 64 scopeid 0x1
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255
inet 192.168.0.5 netmask 0xffffff00 broadcast 192.168.0.255
media: Ethernet autoselect (1000baseTX <full-duplex,flag0,flag1>)
(I also have a Mac OX 10.5 which also resolves 0.0.0.0 to 192.168.0.1.
But a windows machine do not resolve 0.0.0.0)
Gah, my bad.
the nfe0 interface are not on OpenBSD, but on my FreeBSD box (where this
arp-messages shows up)
email@example.com mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"