Hi Edward,
same here (RELEASE 6.3): atapci0: <Promise PDC40718 SATA300 controller> port 0xd800-0xd87f,0xd400-0xd4ff mem 0xdfeff000-0xdfefffff,0xdfec00 00-0xdfedffff irq 19 at device 3.0 on pci2 [...] atapci1: <Promise PDC20376 SATA150 controller> port 0xc400-0xc43f,0xc000-0xc00f,0xbc00-0xbc7f mem 0xdfefd000-0xdfefdfff,0xdfe40000-0xdfe5ffff irq 22 at device 14.0 on pci2 [...] ad0: 78533MB <Hitachi HDS728080PLAT20 PF2OA21B> at ata0-master UDMA100 ad2: 286168MB <SAMSUNG HD300LD WK100-12> at ata1-master UDMA100 GEOM_LABEL: Label for provider ad0s1f is label/HOMEcrypt. GEOM_LABEL: Label for provider ad2s1 is ufs/DATA. acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: CDROM <HL-DT-ST DVDRAM GH20NS10/EL00> at ata5-master SATA150 acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command [... lot more ...] acd0: timeout waiting to issue command acd0: error issuing ATA PACKET command ad12: 286188MB <Maxtor 7L300S0 BANC1G10> at ata6-master SATA150 ad14: 476940MB <SAMSUNG HD501LJ CR100-10> at ata7-master SATA150 [...] The DVDRAM doesn't work on both Promise-Controllers (onboard and the 300TX4 PCI), also tested with 7-STBLE snapshot and 8-CURRENT snapshot live CDs. It's running perfect with a recent Knoppix DVD so it's not a hardware bug. See http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/122291 for more details on this. Regards Raphael Becker On Sat, Jun 07, 2008 at 12:03:00AM -0700, Edward Sutton wrote: > > This is a collection of information to my troubles. I am hoping to find out > what mailing list is most appropriate before I started posting kernel dump > backtraces and asking what other details to post. What other details may be > relevant to gather would also be helpful. Are there safe ways to crash a > system to gather details without further filesystem corruption? > My motherboard is about six years old so it has no SATA ports for the > drive; My old Promise SATA150 TX4 was loaded with four hard drives; it > appears to not support optical drives so I recently purchased the Promise > SATA300 TX2plus to have a card giving what I need on this old computer and > hopefully an IDE port on my next computer (if the board I buy in a year comes > with a PCI slot for it). I thought Promise cards receive good FreeBSD support > and was readily available at a local retailer. > Upon booting, I get the following 2 errors after a long pause: > > acd0: timeout waiting to issue command > acd0: error issuing ATA PACKET command -- Raphael Becker <[EMAIL PROTECTED]> http://rabe.uugrn.org/ GnuPG: E7B2 1D66 3AF2 EDC7 9828 6D7A 9CDA 3E7B 10CA 9F2D .........|.........|.........|.........|.........|.........|.........|..
pgpB8NzQ5ZFpJ.pgp
Description: PGP signature
