This is my router info.

rawhide> ip addr show
1: lo: <LOOPBACK,UP> mtu 3924 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 brd 127.255.255.255 scope global lo
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
    link/ether 00:50:ba:b8:8c:2e brd ff:ff:ff:ff:ff:ff
    inet 66.41.139.87/21 brd 255.255.255.255 scope global eth0
3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
    link/ether 00:50:ba:ae:be:fa brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.254/24 brd 192.168.1.255 scope global eth1

rawhide> ip route show
192.168.1.0/24 dev eth1  proto kernel  scope link  src 192.168.1.254
66.41.136.0/21 dev eth0  proto kernel  scope link  src 66.41.139.87
default via 66.41.136.1 dev eth0

----- Original Message -----
From: "Bill Moran" <[EMAIL PROTECTED]>
To: "Brian Henning" <[EMAIL PROTECTED]>
Cc: "freebsd" <[EMAIL PROTECTED]>
Sent: Thursday, February 13, 2003 1:49 PM
Subject: Re: network issue revisited


> Brian Henning wrote:
> > Let me try again, here is my situation and question with a little more
detail.
> >
> > My local network (192.168.1.0) consists of two machine BSD1 (192.168.1.40)
and
> >
> > BSD2 (192.168.1.42). Both of these machines use the subnet mask
255.255.255.0
> > and gateway 192.168.1.254.
> >
> > There is a third machine GATEWAY (192.168.1.254, ip address from isp) has
two
> > nics and acts as the router.
> >
> > All of these machine are connected to a switch locally.
> >
> > When my internet connection goes down for whatever reason I
> > loose connections in my local network. For example, i can't ping
192.168.1.40
> > from 192.168.1.42. is there any explaination for this?
>
> Not that I can think of.  There's no reason I can imagine that your local
> connectivity should suffer from Internet problems.  Especially if you're
> connecting via IP address (which rules out DNS problems).
>
> Could you provide 'netstat -rn' and 'ifconfig' output from GATEWAY, please.
> I don't see anything in the other information you provided that would
> indicate any sort of misconfig on BSD2.
>
> --
> Bill Moran
> Potential Technologies
> http://www.potentialtech.com
>

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to