On Fri, Jun 20, 2008 at 4:50 AM, Yuri Pankov <[EMAIL PROTECTED]> wrote: > The MadDaemon wrote: >> >> On Tue, Jun 17, 2008 at 3:47 PM, Yuri Pankov <[EMAIL PROTECTED]> >> wrote: >>> >>> The MadDaemon wrote: >>>> >>>> List, >>>> >>>> I'm having a problem with a dual-homed host running 7.0-RELEASE with >>>> regards to traffic on one of the interfaces that I'm hoping someone >>>> knows something about. >>>> >>>> The goal of this box is to run Nessus on bge0 only (which is plugged >>>> into a trunk port on a switch), keeping fxp0 free as the admin >>>> interface and for serving web pages on my LAN. >>>> >>>> Here's ifconfig: >>>> >>>> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 >>>> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> >>>> ether 00:19:b9:22:a8:22 >>>> inet 0.0.0.0 netmask 0xffffff00 broadcast 0.0.0.255 >>>> media: Ethernet autoselect (100baseTX <full-duplex>) >>>> status: active >>>> fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>> 1500 >>>> options=b<RXCSUM,TXCSUM,VLAN_MTU> >>>> ether 00:02:b3:bb:59:17 >>>> inet 10.20.10.24 netmask 0xffffff00 broadcast 172.20.10.255 >>>> inet 10.20.10.28 netmask 0xffffffff broadcast 172.20.10.28 >>>> inet 10.20.10.29 netmask 0xffffffff broadcast 172.20.10.29 >>>> media: Ethernet autoselect (100baseTX <full-duplex>) >>>> status: active >>>> >>>> /etc/rc.conf section: >>>> >>>> # Created: Mon Jun 9 09:32:52 2008 >>>> defaultrouter="10.20.10.254" >>>> hostname="darkhorse.mydomain.local" >>>> ifconfig_fxp0="inet 10.20.10.24 netmask 255.255.255.0" >>>> ifconfig_fxp0_alias0="inet 10.20.10.28 netmask 255.255.255.255" >>>> ifconfig_fxp0_alias1="inet 10.20.10.29 netmask 255.255.255.255" >>>> ifconfig_bge0="inet 0.0.0.0 netmask 255.255.255.0" >>> >>> Try using ifconfig_bge0="up" in /etc/rc.conf instead of assigning bogus >>> (probably) address. >> >> Tried that as well and it didn't work. I found a few different things >> regarding VLAN setup, so my new (and not working) configuration is >> this (in part): >> >> ###################### >> # VLAN Configuration # >> ###################### >> cloned_interface="vlan2" >> ifconfig_vlan2="inet 10.21.1.245 netmask 255.255.255.0 vlan 2 vlandev >> bge0" >> cloned_interface="vlan5" >> ifconfig_vlan5="inet 10.20.8.245 netmask 255.255.255.0 vlan 5 vlandev >> bge0" > > So 10.20.8.245 is in tagged vlan 5.
Yes.. >> cloned_interface="vlan6" >> ifconfig_vlan6="inet 10.20.7.245 netmask 255.255.255.0 vlan 6 vlandev >> bge0" >> >> (I got the VLAN IDs straight from the router, so they are correct for >> each VLAN.) >> >> [EMAIL PROTECTED] [~]# ifconfig bge0 inet 10.20.8.245 netmask 255.255.255.0 > > and here you are trying to set 10.20.8.245 on parent bge0 without 802.1q > tagging, how do you expect it to work? I didn't, actually - lack of sleep = brainfart :( >> [EMAIL PROTECTED] [~]# ifconfig bge0 up >> [EMAIL PROTECTED] [~]# ifconfig bge0 >> bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >> options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> >> ether 00:19:b9:22:a8:22 >> inet 10.20.8.245 netmask 0xffffff00 broadcast 10.20.8.255 >> media: Ethernet autoselect (100baseTX <full-duplex>) >> status: active >> [EMAIL PROTECTED] [~]# ping -c 2 10.20.8.4 >> PING 10.20.8.4 (10.20.8.4): 56 data bytes >> >> --- 10.20.8.4 ping statistics --- >> 2 packets transmitted, 0 packets received, 100.0% packet loss >> > > Sorry if I understood you incorrectly. No problem.. I believe if fixed it by setting this in /etc/rc.conf: cloned_interfaces="vlan2 vlan5 vlan6 vlan7 vlan107 vlan201 vlan212" ifconfig_vlan2="inet 10.21.1.245 netmask 255.255.255.0 vlan 2 vlandev bge0" ifconfig_vlan5="inet 10.20.8.245 netmask 255.255.255.0 vlan 5 vlandev bge0" ifconfig_vlan6="inet 10.20.7.245 netmask 255.255.255.0 vlan 6 vlandev bge0" ifconfig_vlan7="inet 10.20.253.245 netmask 255.255.255.0 vlan 7 vlandev bge0" ifconfig_vlan107="inet 10.21.7.245 netmask 255.255.255.0 vlan 107 vlandev bge0" ifconfig_vlan201="inet 10.20.1.245 netmask 255.255.255.0 vlan 201 vlandev bge0" ifconfig_vlan212="inet 10.21.2.245 netmask 255.255.255.0 vlan 212 vlandev bge0" ###################### # Bring up bge0 manually to make sure it's up: ifconfig_bge0="up" ###################### _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
