Howdy, thanks for the response.

On Fri, 2003-02-14 at 15:39, Stacey Roberts wrote:
> What version of FreeBSD is this?


> Can you post the dmesg output for both (or more) of the nics on the
> system, please?
> What is the P'nP OS BIOS option set to on this box?

Here's the dmesg:
ed1: <Linksys Combo EthernetCard> at port 0x100-0x11f irq 11 function 0
config 16 on pccard0
ed1: address 00:e0:98:88:91:84, type Linksys (16 bit)
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Product version: 5.0
Product name: IBM | 10/100 EtherJet CardBus | IBMC-10/100 | 1.04 |
Manufacturer ID: a400130181
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060006295290d8
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
cardbus1: Invalid BAR number: 27(06)
CIS reading done
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x88002400-0x880024ff,0x88002500-0x8800257f irq 11 at device 0.0 on
dc0: Ethernet address: 06:00:06:29:52:90
miibus1: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus1
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

I don't see any mention of PNP in the BIOS and I didn't specifically
enable anything in the KERNEL.  Let me know if you need more.

Now, here's the weird thing.  I reconfigured my ipnat.rules, ipf.rules
and rc.conf to switch the NICs.  I rebooted and switched the cables and
now I haven't gotten an error on the new dc0 interface (which is now the
promiscuous snort interface).  So, it might be that the ed1 interface is
conflicting with something and I only hear about it when I put it into
promiscuous mode.  I'm going to try to do that next.



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to