Derek Ragona wrote:
At 09:38 AM 6/26/2008, Garrett Cooper wrote:
On Thu, Jun 26, 2008 at 7:30 AM, Casey Scott <[EMAIL PROTECTED]>
> ----- "Derek Ragona" <[EMAIL PROTECTED]> wrote:
>> At 08:49 AM 6/26/2008, Garrett Cooper wrote:
>> > First off sorry for the cross-post. I typically don't do this
>> >but this is an important question, so please bear with me. I'm just
>> >trying to get more eyes on the subject so I can (maybe) get a reply
>> > I'm running 8-CURRENT on my machine and it appears that one
>> >the disks in my RAID5 array has taken a nose dive (BIOS recognizes
>> >that it exists, but Intel Matrix Manager claims that the disk is an
>> >"Offline Member"). After doing some reading it appears that it's
>> >kaput, so I need to get a replacement disk to fix this one...
>> > That aside, I need to determine how to rebuild the array in a
>> >Unix environment because Intel only provides instructions for how to
>> >use their Windows matrix manager. If anyone can point me to some
>> >or provide me with some pointers on how to correct this issue, I'd
>> >you a lot; in fact the next time you come by Santa Cruz, CA I'll
>> >gladly treat you to some beers or something else you might want
>> >Linux solutions (if there isn't a proper one for FreeBSD) are valid,
>> >as long as the core data remains uncorrupted and I can do what I
>> >to from a LiveCD. I'm just scared to boot up OS and have it do some
>> >irrevocable operation like fsck -y and assume parity errors are ok
>> >something along those lines (I don't remember if I set rc.conf to
>> >fsck -y and I know I can change that from single-user mode, but I
>> >to play things conservatively if at all possible) :\...
>> > Filesystem is UFS2 with softupdates of course.
>> > Point proven that I need to backup my data more often :(...
>> >PS If replying on the questions@ list, please CC me as I'm not
>> >subscribed to that list.
>> Most of the intel RAID functions can be accessed through the BIOS
>> too. It isn't as pretty as the GUI versions but has the same
>> The drives are labeled so the RAID controller will know a drive was
>> replaced. You just need to tell the controller to add it to the
>> rebuild the array.
> I haven't seen an Intel card in a while, but if you see an
> option, DON'T USE IT. On other cards it exists, and destroys the
Sean, Casey, and Derek:
Thanks for the replies so far.
Yeah, I stay away from things that say "Initialize", "Delete Array",
etc :). Part of my concern came from the fact that I got a kernel
panic the last time I tried to boot into FreeBSD, but that may have
been because one of my disks was disconnected and the bzero attempt
was polling some address out of range (I was attempting to
troubleshoot the issue at the time).
I'm pretty fed up with Intel's ICH9R interface too so I'm hoping
(crosses fingers) that I'll be able to afford an Adaptec card of some
flavor that's compatible with -CURRENT. For that I'll ask for advice
on current@ later on which card to get...
It looks like my figuring out what to do in solving this issue will
only be solved by grabbing another drive and replacing the dead one.
Oh well, here goes for an RMA...
If you are looking to move up, look at the 3ware RAID cards. Not sure
which models work with FreeBSD, but these card do perform very well.
I'm happy with my HighPoint RocketRAIDs. HPT's site has the drives and
they work in 7.
email@example.com mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"