On Monday 07 July 2008 03:03:48 Diego F. Arias R. wrote: > i have installed freebsd on my laptop but i have a weird problem. I > can assosiate with my AP(AccessPoint) using my WEp key but dont works. > If i try to use DHCP or set a IP address dont works but if i put > tcpdump i can see a few packets. If i try with a keyless network it > works. > > > yatusabes# uname -a > FreeBSD yatusabes 7.0-RELEASE-p2 FreeBSD 7.0-RELEASE-p2 #0: Wed Jun 18 > 07:33:20 UTC 2008 > [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 > > yatusabes# ifconfig iwi0 > iwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:13:ce:e8:e8:f4 > inet 192.168.122.1 netmask 0xffffff00 broadcast 192.168.122.255 > media: IEEE 802.11 Wireless Ethernet autoselect > status: associated > ssid "Dark Princess" channel 1 (2412 Mhz 11g) bssid > 00:1b:11:9b:19:7c authmode OPEN privacy ON deftxkey 1 wepkey 1:104-bit > bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 > roam:rate11g 5 protmode CTS > > > yatusabes# ifconfig iwi0 ssid "Dark Princess" wepkey thekey weptxkey 1 up
This is up and working. So define 'not working'. Other then your IP being .1 in /24 network, which is generally used for the router, I don't see anything wrong. If the key wasn't accepted, it wouldn't be associated. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"