Are you sure the cable on your ad0 maxtor drive is ok? I'm asking because I had a problem with using some no-name ata cable instead of the one that came with the drive, and my problem was similar to yours.
Ken On Sun, 16 Feb 2003, Trent Nelson wrote: > Hi, > > I've had a new server for a little over three months now that's > started running into some worrying ata troubles. The server is > an Athlon XP 1800+, ASUS A7V8X M/B, 1GB PC2700 DDR RAM, 2x 60GB > Maxtor (6Y060L0) HDDs. I've also purchased a ``Sil 0680 ATA133 > controller'' that provides master ata channels for a spare 30GB > drive and my CD-RW. It's running 4.7-STABLE as of a few days > > The error messages and relevant dmesg output follows. What do > these errors normally indicate? Dodgy hardware? The drives > are pretty much brand new (< 3 months), as are all the other > components. I don't think it's a cooling problem, either. I've > got a 120mm fan blowing cool air onto the drives, and each drive > is fitted with an individual cooling unit (two small fans on the > controller-side of the drive). The air is never more than appro- > ximately 20 degrees Celsius in that part of the box. > > Other random tidbits; the server runs VMware and fvcool, as well > as a few other standard daemons, but the box is nearly always > idle. > > Thanks in advance. > > Regards, > > Trent. > > > ad0: WRITE command timeout tag=0 serv=0 - resetting > ata0: resetting devices .. done > ad0s1g: soft error (ECC corrected) reading fsbn 3158527 of 6368-6399 (ad0s1 bn >3158527; cn 196 tn 155 sn 22)ad0s1g: hard error reading fsbn 3158527 of 6368-6399 >(ad0s1 bn 3158527; cn 196 tn 155 sn 22) > trying PIO mode > ad0: READ command timeout tag=0 serv=0 - resetting > ata0: resetting devices .. done > ad0: DMA problem fallback to PIO mode > ad0: DMA problem fallback to PIO mode > ad0s1a: soft error (ECC corrected) reading fsbn 24231 of 12076-12095 (ad0s1 bn >24231; cn 1 tn 129 sn 39)ad0s1a: hard error reading f sbn 24231 of 12076-12095 (ad0s1 >bn 24231; cn 1 tn 129 sn 39) status=7f error=7f > ad0: timeout waiting for DRQ - resetting > ata0: resetting devices .. ata0-slave: ATA identify retries exceeded > done > ad0: timeout waiting for DRQ - resetting > ata0: resetting devices .. done > ad0s1g: soft error (ECC corrected) reading fsbn 3158527 of 6368-6399 > (ad0s1 bn 3158527; cn 196 tn 155 sn 22)ad0s1g: hard error reading fsbn 3158527 of >6368-6399 (ad0s1 bn 3158527; cn 196 tn 155 sn 22) status=7f error=7f > ad0: READ command timeout tag=0 serv=0 - resetting > ata0: resetting devices .. done > ad0: READ command timeout tag=0 serv=0 - resetting > ata0: resetting devices .. done > ad0s1d: soft error (ECC corrected) reading fsbn 72749503 of > 21170368-21170391 (ad0s1 bn 72749503; cn 4528 tn 114 sn 1)ad0s1d: hard e > rror reading fsbn 72749503 of 21170368-21170391 (ad0s1 bn 72749503; cn > 4528 tn 114 sn 1) status=7f error=7f > spec_getpages:(#ad/0x20003) I/O read failure: (error=5) bp 0xcfeb9390 vp 0xe06f5b40 > size: 12288, resid: 12288, a_count: 12284, valid: 0x0 > nread: 0, reqpage: 0, pindex: 0, pcount: 3 > ad0: READ command timeout tag=0 serv=0 - resetting > ata0: resetting devices .. done > > Relevant dmesg output: > > FreeBSD 4.7-STABLE #8: Sat Feb 15 17:44:48 GMT 2003 > >[EMAIL PROTECTED]:/obj/shared/work/BSD/FreeBSD/FreeBSD-4.x/src/sys/ZOOM > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD Athlon(TM) XP 1800+ (1533.40-MHz 686-class CPU) > real memory = 1073725440 (1048560K bytes) > avail memory = 1041625088 (1017212K bytes) > atapci0: <Sil 0680 ATA133 controller> port >0x9800-0x980f,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 mem >0xeb000000-0xeb 0000ff irq 5 at device 12.0 on pci0 > ata2: at 0xb000 on atapci0 > ata3: at 0xa400 on atapci0 > atapci1: <VIA 8235 ATA133 controller> port 0x8400-0x840f at device 17.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci1 > ata1: at 0x170 irq 15 on atapci1 > ad0: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata0-master UDMA133 > ad2: 58644MB <Maxtor 6Y060L0> [119150/16/63] at ata1-master UDMA133 > ad4: 28629MB <QUANTUM FIREBALLP AS30.0> [58168/16/63] at ata2-master UDMA100 > acd0: CD-RW <LITE-ON LTR-52246S> at ata3-master UDMA33 > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
