On Wed, 2008-08-27 at 10:43 +0200, Wojciech Puchar wrote: > >> > >> what i do wrong? > >> > > Have you checked flag setting on sio? > > > > # dmesg | grep "sio.*flags" > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > > on acpi0 > > yes. i then tried to change flags to 0x20 (force console) - still doesn't > work > > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x20 on acpi0 > sio0: type 16450 > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > Careful, note the last sentence in the 0x20 flag description:
0x20 Forces this unit to be the console (unless there is another higher priority console), regardless of the -h option discussed below. The flag 0x20 must be used together with the 0x10 flag. i.e. to use 0x20 you have to set it to 0x30 > > > it is qemu "machine" for now, but just to test, i would like to use it on > real hardware. > Never tried, could be a qemu-specific issue? Wayne _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"