On Tuesday 11 November 2008 13:28:53 Pieter Donche wrote: > On Tue, 11 Nov 2008, Mel wrote: > > On Tuesday 11 November 2008 12:12:06 Pieter Donche wrote: > >> On the same portable there is also a SUSE Linux 10.1 and WinXP, which > >> works in 1280x768 (so the hardware can use this resolution) > >> > >> In /var/log/Xorg.0.log is see many references to 1280x768 for the 'local > >> flat panel' , PanelID returned panel resolution: 1280x768, also > >> Printing DDC gathered Modelines: > >> 3 lines > >> (||) 1810(0): Modeline "1280x768"x0.0 (followed by varying numbers and > >> a KhZ to end) > >> follewed y > >> Mode: 30 (640x480) > >> (specifications) > >> diffenrent Mode sections but 1024x768 at the highest > >> .. > >> (||) |810(0): Not using mode "1280x768i (no mode of that name) > > > > ^^^ > > If this is accurate, you seem to have a trailing letter 'i' in your > > xorg.conf that invalidates the mode line. > > > > And you're using an Intel 810 integrated graphics card. Sadly, that > > doesn't come with probing tool that I know of that would print the > > information the card and monitor exchange about syncrates and display > > sizes. > > > > Rule out the typo first though. > > > > I have a vague recollection of this card putting 1024x768 before 1280x768 > > in the mode list it returns, so that it defaults to 1024x768, but I'm not > > sure where or when I read that. Either way, hardcoding the desired > > modeline (without typos) in xorg.conf should work. > > If there was no typo, please paste your entire xorg.conf into the mail. > > We may be missing something obvious. > > -- > > Mel > > > > Problem with today's modular software: they start with the modules > > and never get to the software part. > > There was only a typo in my mail, not in xorg.conf.. > > In included below my xorg.conf file and the Xorg.0.log
Rearranging for clarity: > ------------------ > xorg.conf > ------------------ > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Viewport 0 0 > Depth 1 > Modes "1280x768" > EndSubSection > (II) I810(0): Supported Future Video Modes: > (II) I810(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 I was already wondering why a card would report 1280x768, it's not the standard for that width, 1280x800 is. Try changing the modes to 1280x800. How the 768 ends up in the detection is probably something for the i810 driver developers to figure out. -- Mel Problem with today's modular software: they start with the modules and never get to the software part. _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"