hamtilla wrote:
I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has
one integrated RTL8168/8111 gigabit NIC as well as an expansion board with
three RTL8168/8111 NICs.
[EMAIL PROTECTED]:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec
rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
[EMAIL PROTECTED]:2:4:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
class = network
subclass = ethernet
[EMAIL PROTECTED]:2:6:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
class = network
subclass = ethernet
[EMAIL PROTECTED]:2:7:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
class = network
subclass = ethernet
Why would the three NICs work while the onboard NIC does not? I would
imagine the same driver services both controllers. Do I need to assign an
interface to the device somehow?
Thank you!
Aloha,
I use the same PCI cards in a number of servers. All work fine. But on
board ones are only 100 so I dont use them.
However I notice that the on board nic in your case uses a different
chipset:
chip=0x816810ec is onboard.
chip=0x816710ec is slot pci's.
I dont know what this means in respect to operation problems though.
--
~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740
+ http://hawaiidakine.com + http://freebsdinfo.org +
+ http://aloha50.net - Supporting - FreeBSD 6.* - 7.* - 8.* +
< email: [EMAIL PROTECTED] >
"All that's really worth doing is what we do for others."- Lewis Carrol
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
