On 12/22/08 4:06 AM, "Geoff Roberts" <ge...@apro.com.au> wrote: > Hi, > > I have a FreeBSD 7.0 box with pf. > > I have two internal networks (intnet0 and intnet1) and two internal networks > (extnet0 and extnet1). > > extnet0 and extnet1 are two different gateways to the internet. > > I only have one physical internal (int0) and one physical external (ext0) > interface. > > Traffic from intnet0 needs to go out on extnet0 > > Traffic from intnet1 needs to go out on extnet1 (consider this a default route > for any traffic not going out on extnet0). > > What are some suggested ways of doing this? > > Assume addresses are (these are made up, but hopefully help paint the > picture): > > intnet0 - 192.168.50.0/24 > extnet0 - 10.10.10.8/30 > - extnet0 address 10.10.10.8.10 > - default route 10.10.10.9 > - broadcast 10.10.10.11 > > intnet1 - 192.168.60.0/24 > extnet1 - 10.10.10.12/30 > - extnet1 address 10.10.10.14 > - default route 10.10.10.13 > - broadcast 10.10.10.15 > > So far I have created vlans via a switch on each interface to "multiplex" the > connections: > > vlan10 - 192.168.50.0/24 and vlan20 - 192.168.60.0/24 come in on a single > cable to int0. > > vlan50 - 10.10.10.8/30 and vlan60 - 10.10.10.12/30 come in on a single cable > to ext0. > > However, since I have the defaultroute set for 10.10.10.13 all traffic from > intnet0 is going out on vlan60 whereas i want it to go out on vlan50. > > Am I going about this the wrong way? > I think this will work. Let's assume: $vlan10_if -> macro for your tagged VLAN 10 interface $vlan20_if -> macro for your tagged VLAN 20 interface $vlan50_if -> macro for your tagged VLAN 50 interface $vlan60_if -> macro for your tagged VLAN 60 interface $vlan50_gw = 10.10.10.9 $vlan60_gw = 10.10.10.13 pass in on $vlan10_if route-to ($vlan50_if $vlan50_gw) from any to any pass in on $vlan20_if route-to ($vlan60_if $vlan60_gw) from any to any That would be in conjunction with your NAT's and any RDR's as well. Regards, Mike _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"