Hi I have two PCI NICs and one builtin NIC on freebsd 7.0 ifconfig shows information somthing like:
bge0: flags=8843<UP, broadcast, runing, simplex, multicast>metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM, VLAN_HWTAGGING. VLAN_HWCSUM> ether 00:13:21:f8:7e:56 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (none) status: no carrier sk0: flags=8843<UP, broadcast, runing, simplex, multicast>metric 0 mtu 1500 options=b<RXCSUM,TXCSUM, VLAN_MTU> ether 00:0a:5e:1a:69:25 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (none) status: no carrier Note: bge0 is builtin NIC sk0 is 3com PCI NIC now after configuration of IPV4 Addresses, when i verify the configuration with ping if i ping bge0(ping 192.168.0.1) i get the response of success but when i ping sk0 (ping 192.168.0.2) Ping gets stuck and gives no response, neither it gives success or host unreachable or denied kinda errors.. it just hangs over there.. and i can juz see one line of ping not proceeding anyway. and if I terminate it via CTRL C then i get statistics sumthing like 3 packets sent, 0 received and 100% loss... I am stuck and my brain does not work any more here.. Can anybody help me ... Regards!!!! Faizan _________________________________________________________________ It’s the same Hotmail®. If by “same” you mean up to 70% faster. http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_AE_Same_022009_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"