After removing HorizSync and VertRefresh from xorg.conf xrandr happily
shows
#xrandr
Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis)
306mm x 230mm
1600x1200 65.0*
1280x1024 75.0
1280x960 60.0
1152x864 75.0
1024x768 85.0 75.0 70.1 60.0 43.5
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 75.0 72.8 66.7 59.9
720x400 87.8 70.1
Though, using the default of 1600x1200 redraw is slow, jittery.
and seeing this in the Xorg.log
exaCopyDirty: Pending damage region empty!
(--) PCI: (0...@0:2:1) Intel Corporation 82915G Integrated Graphics
Controller rev 4, Mem @ 0xcfe00000/524288
(this seems to be repeated after first run of mplayer, or vlc:
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160
1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601
605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601
603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481
484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489
492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483
486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421
423 449 -hsync -vsync (39.4 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412
414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768
769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768
771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768
771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768
768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625
628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601
604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637
643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864
865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481
484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601
604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768
769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960
961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0 175.50 1600 1664 1856 2160
1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): EDID vendor "NEC", prod id 17450
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 306 x 230
vgap...@pci0:0:2:1: class=0x030000 card=0x25821043 chip=0x25828086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82915G/GV/GL, 82910GL Integrated Graphics Device'
class = display
subclass = VGA
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
2.1 on pci0
--
Over the years I've come to regard you as people I've met.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
