On Mon, 2009-04-06 at 18:59 -0400, Jimmie James wrote:
> After removing HorizSync and VertRefresh from xorg.conf xrandr happily 
> shows
> #xrandr
> Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
> VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) 
> 306mm x 230mm
>     1600x1200      65.0*
>     1280x1024      75.0
>     1280x960       60.0
>     1152x864       75.0
>     1024x768       85.0     75.0     70.1     60.0     43.5
>     832x624        74.6
>     800x600        85.1     72.2     75.0     60.3     56.2
>     640x480        85.0     75.0     72.8     66.7     59.9
>     720x400        87.8     70.1
> 
> Though, using the default of 1600x1200 redraw is slow, jittery.
> and seeing this in the Xorg.log
>   exaCopyDirty: Pending damage region empty!

All indications are that this is harmless...

robert.

> 
> (--) PCI: (0...@0:2:1) Intel Corporation 82915G Integrated Graphics 
> Controller rev 4, Mem @ 0xcfe00000/524288
> 
> (this seems to be repeated after first run of mplayer, or vlc:
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160 
> 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
> (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 
> 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 
> 603 625 +hsync +vsync (35.2 kHz)
> (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 
> 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 
> 492 520 -hsync -vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 
> 486 525 -hsync -vsync (35.0 kHz)
> (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 
> 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0   35.50  720 738 846 900  400 421 
> 423 449 -hsync -vsync (39.4 kHz)
> (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 
> 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688 
> 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 
> 769 772 800 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 
> 771 777 806 -hsync -vsync (56.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 
> 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 
> 768 772 817 interlace +hsync +vsync (35.5 kHz)
> (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 
> 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 
> 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 
> 643 666 +hsync +vsync (48.1 kHz)
> (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 
> 865 868 900 +hsync +vsync (67.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 
> 484 509 -hsync -vsync (43.3 kHz)
> (II) intel(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 
> 604 631 +hsync +vsync (53.7 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 
> 769 772 808 +hsync +vsync (68.7 kHz)
> (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 
> 961 964 1000 +hsync +vsync (60.0 kHz)
> (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688 
> 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> (II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160 
> 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
> (II) intel(0): EDID vendor "NEC", prod id 17450
> 
> (II) intel(0): direct rendering: XF86DRI Enabled
> (--) RandR disabled
> 
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 10, (OK)
> drmOpenByBusid: drmOpenMinor returns 10
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) AIGLX: enabled GLX_SGI_make_current_read
> (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
> (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/i915_dri.so
> (II) GLX: Initialized DRI GL provider for screen 0
> (II) intel(0): Setting screen physical size to 306 x 230
> 
> 
> 
> vgap...@pci0:0:2:1:     class=0x030000 card=0x25821043 chip=0x25828086
> rev=0x04 hdr=0x00
>       vendor     = 'Intel Corporation'
>       device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
>       class      = display
>       subclass   = VGA
> vgapci0: child drm0 requested pci_enable_busmaster
> info: [drm] AGP at 0xd0000000 256MB
> info: [drm] Initialized i915 1.6.0 20080730
> vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
> 2.1 on pci0
> 

-- 
Robert Noland <rnol...@freebsd.org>
FreeBSD

Attachment: signature.asc
Description: This is a digitally signed message part

Reply via email to