On Thu, Apr 09, 2009 at 10:12:58AM -0700, per...@pluto.rain.com wrote: > Trying here, after no answer on usb@ > > When I plug in the reader, I get (on the console): > > umass0: SDMMC M121 USB 2.0 SD/MMC READER, rev 2.00/2.01, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <USB 2.0 SD/MMC Reader \001\000\000?> Removable Direct Access SCSI-0 > device > da0: 1.000MB/s transfers > da0: 1962MB (4019200 512 byte sectors: 255H 63S/T 250C) > > So far, so good, and it appears -- based on this excerpt from the > mtoolstest output -- that mtools is configured to read /dev/da0 as b: > > drive B: > #fn=1 mode=0 defined in /usr/local/etc/mtools.conf > file="/dev/da0" fat_bits=0 > tracks=0 heads=0 sectors=0 hidden=0 > offset=0x0 > partition=0 > > However, when I try to read it with mtools: > > $ mdir -a b: > init B: non DOS media > Cannot initialize 'B:' Are you sure that the drive isn't partitioned? In other words, if you plug in the drive, and you give the command 'ls /dev/da0*', do you only get /dev/da0 or perhaps also /dev/da0s1? If it is partitioned, try /dev/da0s? instead.
Second, does the user running mtools have read and write access to the device? Have you tried just mounting the card reader? Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725)
pgpLbZvqNH2Zv.pgp
Description: PGP signature
