Hey there...
I have a question that I dont really know where else to have this answered...
I'm having a IBM NetVista machine running freebsd (4.7) on it.
It has a built-in soundcard and LAN card
before i recompiled the kernel with device pcm, I had two unknown devices
both from vendor=0x8086 (intel as far as I know :)
now I've got these two lines in my dmesg instead:
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
pcm0: <Intel 82801BA (ICH2)> port 0xf400-0xf43f,0xf000-0xf0ff irq 9 at device 31.5 on pci0

as we can see, the soundcard is found - and it works just fine.. but the other <unknown card> would be the LAN card as far as I can see...
I have no idea how to make freebsd actually find the card / install the correct drivers for it - somebody out there who knows what to do ?
from IBM's page I get this (very helpful) info: Intel 10/100 onboard ethernet
Anybody have any ideas?

this is part of my dmesg, don't think it's useful, but might as well have it included just in case...
I have a 3com (xl0) in the computer, but it would be nicer to have the built-in working.

CPU: Intel(R) Celeron(TM) CPU 1300MHz (1302.96-MHz 686- class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
real memory = 65929216 (64384K bytes)
avail memory = 58568704 (57196K bytes)
Preloaded elf kernel "kernel" at 0xc057c000.
Preloaded elf module "agp.ko" at 0xc057c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f1b70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem 0xfeb80000- 0xfebfffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x78c0-0x78ff irq 10 at device 2.0 on pci1
xl0: Ethernet address: 00:60:08:46:3d:20
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xfff0-0xffff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xfb00-0xfb1f irq 10 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xfb80-0xfb9f irq 5 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel 82801BA (ICH2)> port 0xf400-0xf43f,0xf000-0xf0ff irq 9 at device 31.5 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39205MB <Maxtor 2F040J0> [79656/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata1-master PIO4
pcm0: measured ac97 link rate at 55924 Hz

Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message

Reply via email to